Brother FAX-T98 manual Manual transmission

■The documents to be faxed must be from 148 mm to 216 mm wide and 150 to 600 mm long.

■The ADF can hold up to 10 pages, feeding each one individually through the fax machine. Use standard 64 g/m2~ 90 g/m2 paper when using the ADF; if you are using heavier paper, feed each sheet individually to prevent paper jams.

■Your machine cannot scan anything closer than 4 mm from the edge of the paper.

■Press Resolution (before you send the fax) to select the resolution for the document you are sending. If you wish to send in STANDARD resolution, i.e. a general fax with no graphics, then the default is STANDARD, and the resolution button need not be pressed. (See Fax resolution on page 6-6.)

Manual transmission

Manual transmission lets you hear the dialling, ringing and fax-receiving tones while sending a fax.

1

2

3

Insert the document face down in the ADF.

Pick up the handset and listen for a dial tone.

—OR—

Press Speaker Phone and listen for a dial tone.

Enter the fax number you want to call. (You can enter the digits using the dial pad, or you can call using Search/Mute and or .)

4

5

When you hear the fax tone,	SEND
press Start/Copy.

If you’re using the handset, hang up.

6 - 3 SETUP SEND