
Reception into memory
As soon as the paper tray becomes empty during fax reception, the screen will display CHECK PAPER; please put some paper in the paper tray. (See Quick Setup Guide.)
If the Memory Receive is set to ON
If sufficient memory is available, the current fax reception will continue and remaining pages will be stored in memory. Subsequent incoming faxes will also be stored into memory until the memory becomes full, following which no further incoming fax calls will be answered automatically. To print all the faxes stored in memory, insert paper into the paper tray.
If the Memory Receive is set to OFF
If sufficient memory is available, the current fax reception will continue and remaining pages will be stored in memory, subject to available memory. Subsequent incoming faxes will not be answered automatically until fresh paper is put in the paper tray.
1
2
3
Press Menu/Set, 2, 6. | 6.MEM.RECEIVE |
Use or
to select ON (or OFF).
Press Menu/Set.
Press Stop.
Receiving a fax at the end of a conversation
At the end of a conversation you can ask the other party to fax you information before you both hang up.
1 Ask the other party to place the document in their machine and to press the start key. Tell the other party to wait until the fax machine sends receiving tones (chirps) before hanging up.
2
3
When you hear the other machine’s CNG tones (beeps), press
Start/Copy.
The LCD shows: | RECEIVE |
Replace the handset.
5 - 7 SETUP RECEIVE