Specifications

Electrical Characteristics

All power is derived from either a commercial ac source or an uninterruptible power supply (UPS). All reserve power in the peripheral cabinet can have its own standard reserve power in the base of the SX-200 system or can also be supported by an additional UPS. The UPS assembly is not manufactured by Mitel Networks.

 

Shelf-Mounted AC Power Supply

 

 

Characteristic

Details

 

 

Input Voltage

102 Vac to 135 Vac (pn 9109-008-000-SA)

 

204 Vac to 270 Vac (pn 9109-008-003-NA)

 

 

Frequency

47 Hz to 63 Hz

 

 

Holdover Time

Minimum of: 40 ms at 120 Vac or 20 ms at 102 Vac delivering full

 

rated load

 

Maximum 16 ms at 115 Vac input at full load (SX-200 EL/ML)

 

 

Input Current

Maximum of: 2.0 Amps at 120 Vac or 1.1 Amps at 240 Vac

 

 

Reserve Power Characteristics

Characteristic

 

Details

 

 

 

Rating

1.5 kVA minimum

 

 

 

 

Input Voltage

120 Vrms +10%,-15%, 60

Hz 15%

 

 

 

Output Voltage

120 Vrms +10%,-15%, 60

Hz 5%

 

 

Output Waveform

Sine wave or quasi-square wave (not square wave)

 

 

Transfer Time

Less than 30 ms (includes fail detection and transfer time)

 

 

Output Receptacle

NEMA 15-A three-pin grounded

 

 

Holdup/Recharge Times

Per customer requirements

 

 

 

Power and Grounding

The system requires a single-phase, 115 Vac, 15 A circuit. A separate ground wire (size 6 AWG) must be installed between the equipment cabinets and the building ground. The ground wire should be a separate ground wire from the hydro.

In addition to proper grounding, an AC surge suppressor is recommended between the SX-200 system and the 115 Vac outlet for each cabinet. This will protect the equipment from power surges.

All trunks and off-premises extensions should be protected against lightning by gas tubes.

50003510

Revision A

225

Page 239
Image 239
Mitel sx-200, SX-2000 manual Electrical Characteristics, Power and Grounding

sx-200, SX-2000 specifications

Mitel SX-2000 is a versatile telecommunications system designed to cater to the communication needs of both large enterprises and smaller organizations. Known for its scalability and robust features, the SX-2000 offers a comprehensive solution for voice communications, making it a preferred choice in various sectors including healthcare, education, and corporate environments.

One of the distinguishing characteristics of the Mitel SX-2000 is its modular architecture. This design allows organizations to expand their system as needed, adding components such as additional trunk lines, user extensions, and various telephony features without a complete overhaul of their existing infrastructure. This adaptability is a significant advantage for businesses anticipating future growth or evolving needs.

The SX-2000 supports a diverse range of telephony protocols and technologies, including traditional analog and digital interfaces, as well as Voice over IP (VoIP). This flexibility enables seamless integration with existing equipment and the incorporation of modern communication technologies. It supports both TDM and IP technology, allowing organizations to bridge their legacy systems with new VoIP solutions, providing a cost-effective avenue for upgrades.

Key features of the Mitel SX-2000 include advanced call handling capabilities, such as call routing, queuing, and conferencing. The system can manage both inbound and outbound calls efficiently, ensuring that communication flows smoothly within the organization. Furthermore, the SX-2000 allows for advanced voicemail systems, automated attendants, and integration with CRM applications, enhancing productivity and customer service.

In terms of user experience, the system offers a variety of end-user devices, including digital and IP phones, which come equipped with intuitive interfaces. These devices offer features like programmable keys, speakerphone capabilities, and support for unified communications, allowing users to manage their calls effectively.

Security is a significant aspect of any telecommunications system, and Mitel has incorporated layers of security protocols in the SX-2000. This includes encryption for VoIP calls and secure access controls to safeguard sensitive communications.

In summary, the Mitel SX-2000 is a robust telecommunications solution that provides extensive flexibility, scalability, and advanced features. Its ability to integrate with various technologies and support a wide range of user needs makes it an ideal choice for organizations looking to enhance their communication infrastructure. With ongoing advancements in telecommunications technology, the SX-2000 remains a relevant and powerful tool for effective communication.