Vermont Castings, Majestic Products RHE Natural Vent Insert
| JR5 | JR6 |
|
|
| JR4 | |
|
|
| |
JR2 |
|
| JR3 |
LG279 |
| Burner Lava Rock | KR1 |
| Placement |
| |
|
|
| |
Fig. 17 | RHE25 log and lava rock placement. |
| |
| KR5 | KR6 | KR4 |
|
|
| |
|
|
| KR3 |
KR2 |
|
|
|
|
|
| KR1 |
Burner Lava Rock
PlacementLG280
Fig. 18 | RHE32 log and lava rock placement. | |
| SR5 | SR6 |
|
| SR4 |
SR2 |
|
|
|
| SR3 |
|
| SR1 |
| Burner Lava Rock |
|
| Placement | LG281 |
Fig. 19 | RHE42 log and lava rock placement. |
Large Lava Rock Placement
The large lava rock provided with this fireplace must be placed on the firebox base on either side of the burner assembly.
Under no circumstances should these lava rock be placed on top of the burner assembly.
Flame Adjustment (RN/RP Models)
For fireplaces equipped with HI/LO valve, flame adjust- ment is accomplished by rotating the HI/LO adjustment knob located near the center of the gas control.
(Figs. 20 & 21)
Turn |
|
|
|
counterclockwise | LO | HI | Turn clockwise |
to decrease |
| to increase | |
|
| ||
flame height |
|
| flame height |
Fig. 20 Flame adjustment knob for Honeywell Valve.
Turn | IH | Turn clockwise | |
counterclockwise |
| ||
| to decrease | ||
to increase |
| ||
| flame height | ||
flame height | LO | ||
| |||
|
|
Fig. 21 Flame adjustment knob for SIT Valve.
Temperature Adjustment (TN/TP Models)
The HI/LO reference on the control knob (Fig. 22) is to indicate a higher or lower temperature setting. This setting controls the heat by reducing then shutting off the flame after the desired temperature is reached. Position the control knob where it effectively maintains a comfortable room temperature.
Fig. 22 Temperature adjustment knob for TN/TP models.
Flame Characteristics
It is important to periodically perform a visual check of the pilot and the burner flames. Compare them to Figure 23 and Figure 24 or 25. If any of the flames appear abnormal, call a service person.
12 | 10000836 |