Vermont Castings, Majestic Products RHE Natural Vent Insert

Troubleshooting the Gas Control System

Eurosit 630 Gas Valve

NOTE: Before troubleshooting the gas control system, be sure external gas shut off is in the "On" position.

WARNING: Before doing any gas control service work, remove glass front.

Symptom

Possible Causes

Corrective Action

1. Spark ignitor will not light

A. Defective or misaligned

Using a match, light pilot. If pilot lights, turn off pilot and

 

electrode at pilot.

push the red button again. If pilot will not light - check

 

 

gap at electrode and pilot-should be 1/8" to have a

 

 

strong spark.

 

B. Defective ignitor (Push Button)

Push Piezo Ignitor Button. Check for spark at electrode

 

 

and pilot. If no spark to pilot, and electrode wire is

 

 

properly connected, replace ignitor.

2. Pilot will not stay lit after

A. Defective pilot generator

Check pilot flame. Must impinge on thermocouple.

carefully following lighting

thermocouple.

Clean and or adjust pilot for maximum flame impinge-

ment instructions.

 

on thermocouple.

 

B. Defective automatic valve

Turn valve knob to "Pilot". Maintain flow to pilot;

 

operator.

millivolt meter should read greater than 10 mV. If the

 

 

reading is okay and the pilot does not stay on, replace

 

 

the gas valve. Note: An interrupter block (not supplied)

 

 

must be used to conduct this test.

3. Pilot burning, no gas to

A. Sensing bulb not in proper

Make sure sensing bulb is located in bracket on the

burner, Valve knob "ON".

location.

lower right hand side of unit.

 

B. Temperature sensing bulb

Carefully examine sensing bulb and capillery tube for

 

damaged or tubing to bulb

damage. If tubing is kinked, replace gas valve.

 

kinked

 

4. Frequent pilot outage

A. Pilot flame may be too low

Clean and/or adjust pilot flame for maximum flame

problem.

or blowing (high) causing the

impingement on thermocouple.

 

 

pilot safety to drop out.

 

B. Possible leak in liner or seals.

Check the venting for leaks or blockage.

 

 

 

16

10000836

Page 16
Image 16
Vermont Casting RHE25, RHE42, RHE32 installation instructions Troubleshooting the Gas Control System

RHE25, RHE32, RHE42 specifications

Vermont Castings has long been a trusted name in the world of cast iron stoves and fireplaces, known for their timeless design and superior craftsmanship. Among their impressive lineup are the RHE42, RHE32, and RHE25 gas fireplaces, each tailored to meet varying needs while elevating the ambiance of any space.

The RHE42 is a standout appliance, boasting a generous heating capacity suitable for larger areas. Its expansive viewing area allows for an impressive flame display, creating a captivating centerpiece for any room. One of the key features of the RHE42 is its advanced burner system, which delivers an even heat distribution and optimal efficiency. Homeowners will appreciate the programmable remote control, providing effortless adjustments to temperature and flame height, enhancing the overall user experience.

Moving to the RHE32, this model strikes an ideal balance between compact size and robust heating performance. Designed for medium-sized rooms, the RHE32 maximizes efficiency without compromising style. With a variety of customizable front finishes and decorative options, this fireplace can seamlessly fit into any decor. The optional blowers enhance heat circulation, ensuring that warmth reaches every corner of the room. The RHE32 is also equipped with a user-friendly electronic ignition system, enabling quick and reliable startup.

The RHE25 is Vermont Castings' smaller yet equally impressive offering. This model caters to those needing a fireplace with a space-saving design while still delivering ample warmth. Ideal for smaller living areas or even as an efficient supplemental heat source, the RHE25 emphasizes environmentally friendly heating with its low emissions and high efficiency. The beautiful cast iron construction not only adds to its aesthetic appeal but also ensures longevity and durability. The easy-to-use controls, alongside the compact design, make it perfect for any homeowner looking for convenience without sacrificing quality.

All three models feature Vermont Castings' signature cast iron construction, ensuring not only durability but also superior heat retention. With an eye on energy efficiency, these fireplaces are designed to meet high efficiency ratings, contributing to reduced heating costs and lower environmental impact. The combination of striking aesthetics, state-of-the-art technology, and superior performance makes the RHE42, RHE32, and RHE25 exceptional choices for anyone looking to enhance their home heating experience. Whether you desire a grand centerpiece or a compact heating solution, Vermont Castings delivers options that cater to every taste and need.