Vermont Castings, Majestic Products RHE Natural Vent Insert
On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor button may vary slightly from those shown in Figure 51. The Honeywell extension pieces are visually different in design and are not interchangeable with the RN/RP knobs shown in Figure 51.
2.Install the hanging brackets. (Fig. 52)
3.Install bracket on each side of the cabinet. (Fig. 56)
4.Install the two ceramic pieces inside the bay win- dow. (Fig. 48)
5.Install the bay window by hanging it onto the lower tabs of the hanging brackets. (Fig. 51)
6.Install top louvre by engaging the oblong holes with the upper tabs of the hanging brackets. (Fig. 54)
7.Install brass trim to the steel frame. (Fig. 55)
Fan Control Box 
| KT205 |
Fig. 49 | Remove fan control box. |
| Fan Control |
| Box |
Extension | |
Bracket | |
| KT207 |
Fig. 50 Attach the control box to the bracket and install bracket into the cabinet.
Extension |
Knobs |
KT204a |
Fig. 51 Install the knob extensions. (RN/RP models Only) |
Hanging Bracket
| KT209a |
Fig. 52 | Hanging bracket alignment. |
| KT210 |
Fig. 53 Hang the window grille or the steel frame onto the lower tabs of the hanging brackets.
KT211 |
Fig. 54 Engage the slots in the upper grille top louvre with the upper tabs of the hanging bracket.
| KT212a |
Fig. 55 | Attach magnets and brass trim to the steel frame. |
FP1270
Fig. 56 Bracket for HEBTKP.
32 | 10000836 |
