Vermont Castings, Majestic Products RHE Natural Vent Insert
B4 HEBTKP, HESBTKP, HECBTK, HECBTKMB & HEBTA Trims
For use with RHEDV32
HECBTK | Cast bay window and grilles in classic black trim kit |
HECBKMB | Cast bay window and grilles in midnight black porcelain enamel trim kit |
HESBTKP | Steel bay window with polished brass and cast grilles in classic black trim kit |
HEBTKP | Steel bay window and bay louvres with polished brass trim kit |
Install the bay window after all other installation work has been completed, thoroughly checked and tested for opera- tion, leaks and proper installation requirements.
Do not remove existing glass with frame
| HEBTKP | HESBTKP | HECBTK & |
|
|
| HECBTKMB |
Fig. 48 | Optional bay front windows available for use on the RHEDV32. |
|
HECBTKP, HECBTKMB and HESBTKP
Trim Assembly
1.Reposition controls.
a.Remove the Fan Speed Control Box (Fig. 49)
b.Attach the Fan Speed Control Box to the Bracket (Fig. 50) and install the Bracket into the Cabinet.
Only for RN/RP VALVE units:
c.Install the Control Knob Extensions onto the appropriate Control Valve Knobs (Fig. 51)
On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor button may vary slightly from those shown in Figure 51. The Honeywell exten- sion pieces are visually different in design and are not interchangeable with the RN/RP knobs shown in Figure 51.
2.Install the hanging brackets. (Fig. 52)
3.Install the two (2) ceramic pieces inside the bay window. (Fig. 48)
4.Install the bay window by hanging it onto the lower tabs of the hanging brackets. (Fig. 53)
5.Install the upper grille by engaging the oblong holes with the upper tabs of the hanging brackets. (Fig. 54)
6.Install brass trim to the steel frame. (Fig. 55) (Only for HESBTKP trim).
HEBTKP Trim Assembly
1.Reposition controls.
a.Remove the Fan Speed Control Box (Fig. 49)
b.Attach the Fan Speed Control Box to the Bracket (Fig. 50) and install the Bracket into the Cabinet.
Only for RN/RP VALVE units:
c.Install the Control Knob Extensions onto the appropriate Control Valve Knobs. (Fig. 51)
10000836 | 31 |