8.Remove the hinge cap (4).
Reverse this procedure to install the hinge cover and hinge cap.
Display assembly
Description | Spare part number |
|
|
Hinge cover (includes hinge cap, WWAN antenna cables and transceivers, | |
and WWAN antenna shield) |
|
|
|
Before removing the display assembly, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 33), and then remove the following components:
a.Service cover (see Service cover on page 34)
b.WWAN module (see WWAN module on page 36)
c.WLAN module (see WLAN module on page 38)
d.
e.Keyboard (see Keyboard on page 44)
f.Bottom cover (see Bottom cover on page 48)
Component replacement procedures | 61 |
