Bottom cover

Description

Spare part number

 

 

Bottom cover (includes battery release latch, NFC board antenna cable, power connector cover,

716739-001

and RJ-45 jack cover)

 

 

 

Before removing the bottom cover, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 33).

5.Remove the service cover (see Service cover on page 34).

6.Remove the keyboard (see Keyboard on page 44).

Remove the bottom cover:

1.Remove the two Phillips PM2.0×4.3 screws that secure the bottom cover to the computer.

2.Close the computer.

3.Turn the computer upside down, with the rear toward you.

4.Disconnect the microphone cable (1) from the system board.

48

Chapter 4 Removal and replacement procedures