7.Lift the rear edge of the keyboard, and then swing the keyboard up and forward until it rests upside down on the palm rest.

8.Release the ZIF connector (1) to which the backlight cable is attached, and then disconnect the backlight cable (2) from the system board.

9.Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect the keyboard cable (4) from the system board.

46

Chapter 4 Removal and replacement procedures

Page 54
Image 54
HP Rlve D8D82UT D8D82UT#ABA, Rlve D3K52UT 11.6 D3K52UT#ABA manual