Vermont Castings, Majestic Products RHE Natural Vent Insert
HE25FP Replacement Parts
1
2
3
4
5FP1293
Vermont Castings, Majestic Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice.
IMPORTANT: Only trim panel assemblies approved by Vermont Castings, Majestic Products can be used on these products.
ALL repair parts will be available from your local dealer. When ordering, always give the following information: Model and serial number, part description with finish and part number.
Key | Description | HE25FP |
1 | Trim Window Top/Bottom | 55098 |
2 | Trim Bottom Channel | 55079 |
3 | Top Louvre Assembly | 54603 |
4 | Bottom Louvre Assembly | 54604 |
5 | Hinge | 52356 |
6 | Fasteners Package (Not Shown) | 57916 |
|
|
|
A3 HE25BTKP
For use with RHEDV25
HE25BTKP Bay window kit with polished brass trim
Do not remove existing glass with frame.
Trim Assembly
1.Reposition controls.
a.Remove the Fan Speed Control Box. (Fig. 31)
b.Attach the Fan Speed Control Box to the Bracket (Fig. 32) and install the Bracket into the Cabinet.
Only for RN/RP VALVE units:
c.Install the Control Knob Extensions onto the appropriate Control Valve Knobs. (Fig. 33)
On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor button may vary slightly from those shown in Figure 33. The Honeywell exten- sion pieces are visually different in design and are not interchangeable with the RN/RP knobs shown in Figure 33.
2.Install the hanging brackets. (Fig. 34)
3.Install bracket on each side of the cabinet. Fig. 38)
4.Install the ceramic piece inside the bay window.
5.Install the bay window by hanging it onto the lower tabs of the hanging brackets. (Fig. 35)
6.Install top louvre by engaging the oblong holes with the upper tabs of the hanging brackets. (Fig. 36)
7.Install brass trim to the steel frame. (Fig. 37)
Fan Control Box
| KT205 |
Fig. 31 | Remove fan control box. |
| Fan Control |
| Box |
Extension | |
Bracket | |
| KT207 |
Fig. 32 Attach the control box to the bracket and install bracket into the cabinet.
Extension |
Knobs |
KT204a |
Fig. 33 Install the knob extensions. (RN/RP models Only) |
Hanging Bracket
KT209b
Fig. 34 Hanging bracket alignment.
24 | 10000836 |