Peripherals
50003510 Revision A 89
SUPERSET Interface Module 2The SUPERSET nterface Module (SIM2) allows the connection of one Mitel Networks 5410
Programmable Key Module or up to two Mitel Networks 5415 Programmable key Modules and
one two-wire analog device such as an analog telephone, fax machine, or modem (to a
maximum loop length of 50 feet and a ringer load of up to 2 REN). This interface module allows
simultaneous use of both the SUPERSET 4000 series telephone and the analog peripheral.
The SUPERSET 4025 and the SUPERSET 4125 telephone require a power adaptor for the
interface module connection. A power adaptor comes with the SUPERSET 4150 telephone but
must be ordered if the PKM 48 or PKM 12 is to go on a SUPERSET 4025 or a SUPERSET
4125 telephone.
Message Waiting is not supported by sets connected to a SIM2. Devices with a Z-type REN
are not to be connected to a SIM2. The analog device must signal using DTMF tones; devices
that use dial pulse signaling are not supported.
SUPERSET Interface Module 2 in a SUPERSET 4150 Telephone