SX-200 General Information Guide

Digital Line Card

The Digital Line Card (DLC) is a low power card with 12 Digital Network Interface Circuits (DNIC) per card. The Digital Line Card interfaces DNIC-based peripheral devices to the system through its Digital Network Interface Circuits (DNIC); the DNIC is a proprietary integrated circuit. DNIC devices include SUPERSET 4001, SUPERSET 4015 , SUPERSET 4025, SUPERSET 4125, SUPERSET 4150, SUPERSET 4090, SUPERSET 401+, SUPERSET 410, SUPERSET 420, SUPERSET 430 telephones, Programmable Key Modules, DATASETs, SUPERCONSOLE 1000 Attendant Console, DMP Module, and SUPERSET 7000 Attendant Consoles.

Note: The card is a high power card if a console is attached to a SX-200 LIGHT cabinet.

LS/GS Trunk Card

The LS/GS Trunk card is a low power card that contains six loop start or ground start trunks (jumper-selectable) and six message registration inputs. The card may be installed in any digital peripheral slot. Facilities provided by the LS/GS Trunk Card include: Loop Start or Ground Start selectable by jumper, M and MM signaling leads (refer to the feature, Meter Pulse Collection), trunk activity indicated by LED (one per trunk), transient suppression on Tip, Ring, and signaling leads, and an alarm LED.

LS/CLASS Trunk Card

The LS/CLASSTrunk card interfaces eight trunk circuits to the system. LS is the acronym for Loop Start and CLASS is the acronym for Custom Local Area Signaling Services (allows the system to receive calling Line ID digits and CLASS name on incoming CLASS trunks). The LS/CLASS Trunk card can be installed into slots one to eight in a SX-200 rack mount cabinet or a SX-200 ML (FD) cabinet. The card is dependant on LIGHTWARE 19 Release 2 or greater software. The LS/CLASS Trunk card provides loop start operation, forward/reverse current detectors (polarity reversal, answer supervision), alarms and trunk activity indicated by an LED (a single LED for any circuit in use), CLASS signal reception, and transient suppression on Tip and Ring leads.

Direct Inward Dial (DID) Trunk Card !

The DID trunk card is a high power card that contains six 1-way Direct Inward Dial circuits. The DID trunk allows incoming trunk calls to dial directly to an extension within the system without attendant intervention.

Off-Premise (OPS) Line Card

The OPS line card is a low power card that interfaces the system to extensions which are part of the system, but are located in a different building from the PBX. It contains additional protection circuitry to protect the system from extraneous high voltages or induced currents that may appear on the line. Each OPS card has six circuits.

COV Card !

The COV card is a high power card that is required to interface to certain voicemail applications.

54

Revision A

50003510

Page 68
Image 68
Mitel SX-2000, sx-200 SX-200 General Information Guide Digital Line Card, LS/GS Trunk Card, LS/CLASS Trunk Card, COV Card

sx-200, SX-2000 specifications

Mitel SX-2000 is a versatile telecommunications system designed to cater to the communication needs of both large enterprises and smaller organizations. Known for its scalability and robust features, the SX-2000 offers a comprehensive solution for voice communications, making it a preferred choice in various sectors including healthcare, education, and corporate environments.

One of the distinguishing characteristics of the Mitel SX-2000 is its modular architecture. This design allows organizations to expand their system as needed, adding components such as additional trunk lines, user extensions, and various telephony features without a complete overhaul of their existing infrastructure. This adaptability is a significant advantage for businesses anticipating future growth or evolving needs.

The SX-2000 supports a diverse range of telephony protocols and technologies, including traditional analog and digital interfaces, as well as Voice over IP (VoIP). This flexibility enables seamless integration with existing equipment and the incorporation of modern communication technologies. It supports both TDM and IP technology, allowing organizations to bridge their legacy systems with new VoIP solutions, providing a cost-effective avenue for upgrades.

Key features of the Mitel SX-2000 include advanced call handling capabilities, such as call routing, queuing, and conferencing. The system can manage both inbound and outbound calls efficiently, ensuring that communication flows smoothly within the organization. Furthermore, the SX-2000 allows for advanced voicemail systems, automated attendants, and integration with CRM applications, enhancing productivity and customer service.

In terms of user experience, the system offers a variety of end-user devices, including digital and IP phones, which come equipped with intuitive interfaces. These devices offer features like programmable keys, speakerphone capabilities, and support for unified communications, allowing users to manage their calls effectively.

Security is a significant aspect of any telecommunications system, and Mitel has incorporated layers of security protocols in the SX-2000. This includes encryption for VoIP calls and secure access controls to safeguard sensitive communications.

In summary, the Mitel SX-2000 is a robust telecommunications solution that provides extensive flexibility, scalability, and advanced features. Its ability to integrate with various technologies and support a wide range of user needs makes it an ideal choice for organizations looking to enhance their communication infrastructure. With ongoing advancements in telecommunications technology, the SX-2000 remains a relevant and powerful tool for effective communication.