![](/images/new-backgrounds/1059157/591579x1.webp)
How To Use This Guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL Steam Mop bare floor steam cleaner. You’ll find assembly and operating instructions, safety precautions, maintenance and troubleshooting instructions. Please read this User’s Guide thoroughly before assembling your Steam Mop.
Pay particular attention to the parts diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they fit. Following this User’s Guide will greatly enhance your ability to get the best performance from your BISSELL Steam Mop for many years.
How To Assemble Your Steam Mop
Your Steam Mop assembles quickly and easily. The only tool you will
need to assemble your cleaner is a Phillips Head | Screwdriver. | ||
Your Steam Mop is packaged with the following items: | |||
Handle Assembly | 1 | Large Philips Head Screw | |
Lower Body with Filter | 1 | Small Philips Head Screw | |
Swivel Head | 2 | Mop Pads |
|
Water Tank | Storage Hook with 2 Screws | ||
| Clean Out Pin |
|
1
1.
Attach Swivel Head.
Secure Swivel Head with small Phillips Head Screw.
2. Tighten until secure.
3.
Secure the handle by placing the Large Phillips Head
4. Screw through the screw opening in the Lower Body and into the rear of the Handle Assembly. Tighten with screwdriver until secure.
Slide Water Tank onto Lower Body by lining up vertical glides
5. and gently sliding tank into place.
2
3
4
5
5