Steam Mop Product Features
Water Tank. The Water Tank is located on the back of the
1. Steam Mop. It can be refilled with water any time during use. Distilled or demineralized water may be used in place of tap water.
Do not use chemicals with your Steam Mop.
Water Filter. The Filter removes minerals and other
2. impurities from tap water, preventing water deposits from damaging your Steam Mop. It should be replaced when the bright green grains turn blue. To maximize performance of the Filter, distilled or demineralized water may be used.
Ready Light. The Ready Light will glow when tap water
3. has been converted to steam and the Steam Mop is ready to use.
4.
5.
Mop Pad. The absorbent terry cloth Mop Pad picks up the
6. dirt loosened by the steam. The Mop Pad is reusable and machine washable.
Storage Hook. Mount on a wall for convenient storage in a
7. closet or utility room.
Mounting instructions:
A. Choose a mounting location that is over a stud.
B. Hold the Storage Hook against the wall with the screw holes at the top of the hook. With a pencil, mark the position of both screw holes.
C. Drill 1/8” diameter holes in the center of your pencil marks.
D. Place Storage Hook over drilled holes.
E.Secure Storage Hook by screwing in place with the provided screws.
Clean Out Pin. The Clean Out Pin is used to clear
8. blockages in the Steam Nozzle. To clean the Nozzle, insert the Clean Out Pin into the brass spray tip.
6
Tip:
Do not attempt to use your Steam Mop without water in the tank.
