Accessory List
Model Name | Description |
Printing Cartridge (1 set per box) | |
1 | |
2 | |
4 |
*For optimum print quality and product performance within published specifications, use only the correct Brother replacement ribbon.
Retrieve a Fax
Press 9 6.
then to Print a Memory Status List press 1, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.
Retrieve all faxes press 2, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7.
then for Fax message, press 1. Voice message, press 2.
1 long beeps – received messages
3 short beeps – no messages
Change Answer Mode
Press 9 8.
then for TAD:MSG MGR, press 1. FAX/TEL, press 2.
FAX ONLY, press 3.
Exit Remote Operation
Press 9 0.
MESSAGE MANAGER
REMOTE CONTROL ACCESS CARD
Using Remote Access Code
1Dial your fax machine phone number from a touch tone phone.
2Enter your Remote Control Access Code (3 digits followed by 
) after the beep.
3The fax machine signals the kinds of messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s) No beeps – no messages
4After 2 short beeps, enter a command.
5Press 9 0 to reset the machine when you finish.
6Hang up.
5
6
1
A - 1
