
Using the SmartThings Wifi/Hub
Notices for connecting a SmartThings Wifi/Hub
•Install a SmartThings Wifi/Hub near the devices to be registered.
•When you add additional SmartThings Wifi/Hubs, install them within the connection range.
•Do not place obstacles between the SmartThings Wifi/Hub and the devices to be registered.
•Obstacles such as the human bodies, walls, corners, or fences can weaken the signals.
•When using the SmartThings Wifi/Hub, it should be connected via the Ethernet cable.
Notices for using Bluetooth
•To avoid problems when connecting your SmartThings Wifi/Hub to another device, place the devices close to each other.
•Ensure that your SmartThings Wifi/Hub and the other Bluetooth device are within the maximum Bluetooth range (5 m). The distance may vary depending on the environment the devices are used in.
•Ensure that there are no obstacles between the SmartThings Wifi/Hub and a connected device, including human bodies, walls, corners, or fences.
•Do not touch the Bluetooth antenna of a connected device.
•Bluetooth uses the same frequency as some industrial, scientific, medical, and low power products and interference may occur when making connections near these types of products.
•Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with your SmartThings Wifi/Hub.
•Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files or illegally tapping communications for commercial purposes).
English (UK)
11
9