8
Insignia NS-LCD19-09 19" LCDTV 720P
www.insignia-products.com
Setting up the channel list
After you select your TV source, if you selected
antenna or cable you need to set up the channel
list. When you set up your channel list, your TV
searches for all available channels in your area
and stores a list of these channels. When you
press CH or CH , your TV skips the
channels that do not have a signal.

Automatically setting up channels

To automatically set up the channel list:
1Press MENU. The on-screen display menu
opens with Setup highlighted.
2Press to enter the sub-menu, then press
or to highlight Auto Ch Searc h.
3Press ENTER or to start the search.

Manually adding or deleting channels from the

channel list

After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
To add or delete channels:
1Press MENU. The on-screen display menu
opens with Setup highlighted.
2Press to enter the sub-menu, then press
or to highlight Manual Channel Set. The

Channel Setup Table

opens.
3Press or to select a channel, then
press ENTER to toggle between viewable
and not viewable.
4Press MENU or EXIT to close the menu.
Changing channels
To change channels:
• Press CH or CH on the remote control
to go to the next lower or higher channel.
Or
Press the number buttons to directly select a
channel (for example, if you want channel 83,
press 8, then press 3).
Or
Press RECALL to go to the last viewed
channel.
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1Press the number buttons for the main
channel (for example 8).
2Press –, then press the sub-channel button
(for example 1).
Adjusting the volume
To adjust the volume:
• Press VOL – or VOL + to decrease or
increase the volume.
• Press MUTE to turn off the sound. Press
MUTE again to turn the sound back on.
Displaying status information
To display status information:
• Press DISPLAY. Your TV displays status
information, such as the channel number or
signal source.
Checking the DTV signal strength
To check the DTV signal strength:
1Press MENU. The on-screen display menu
opens with Setup highlighted.
2Press to enter the sub-menu, then press
or to highlight DTV Signal. The DTV
signal meter opens.
3Press MENU or EXIT to close the menu.
Adding a channel label
To add a label to a channel:
1Press MENU. The on-screen display menu
opens with Setup highlighted.
2Press to enter the sub-menu, then press
or to highlight Channel Labels. The

Channel Label

menu opens.
3Press or to move the cursor to the
channel field, then press or to select a
channel.
4Press or to move the cursor to the label
field, then press or to select the
character.
5Press ENTER to return to the previous menu.
Note
You can press Exit to stop the search.
ENTER