Insignia
Connecting a computer
To connect a computer using VGA:
1Remove the port cover (1) from the back of your TV.
2Plug a VGA cable (4) into the VGA port on the computer (6) and into the VGA INPUT port on the back of your TV.
3Plug an audio cable (5) into the audio jack on the computer (6) and into the AUDIO VGA INPUT port on the back of your TV.
4Turn on your TV.
5Press INPUT, then press
/
to select PC.
Caution
The TV will automatically turn off after one minute if there is no signal in PC mode.
To connect to a computer or other HDMI device using the HDMI jack:
1Remove the port cover from the back of your TV (1).
2Plug an HDMI cable (2) into the HDMI port on the HDMI device (3) and into the HDMI INPUT port on the back of your TV.
3Turn on your TV.
4Press INPUT, then press
/
to select HDMI.
Note
When the computer goes into standby mode, your TV turns off. If your TV does not turn on when you “wake” your computer, press the POWER button on your TV or remote control.
Using the basic controls
Turning the TV on and off
To turn your TV on and off:
1Press POWER on the side of your TV or on the remote control. The POWER/STANDBY indicator turns blue.
2To turn off your TV, press POWER again. The POWER/STANDBY indicator turns red.
Adjusting the volume
You can adjust the volume using the controls on your TV's side panel or the remote control.
To adjust the volume:
1Press VOL+ or VOL- to increase or decrease the volume.
2Press MUTE to mute the sound, then press this button again to restore the sound.
Changing the video mode
Your TV supports multiple video modes.
To select the video mode:
•Press INPUT one or more times to select the video mode, then press ENTER. You can select:
•TV
•AV1
•AV2
•
•Component
•DVD
•HDMI
•PC (VGA)
Using your TV
Selecting the TV signal source
To select the TV signal source:
1Press TV MENU, then press 
/ 
to highlight CHANNEL. The CHANNEL menu opens.
2Press 
to enter the CHANNEL menu.
3Press 
/ 
to select TV Source, then press
/ 
to select Air or CATV.
•
12 |