Insignia NS-MG1344 - page 11

11
HIGH-GLOSS BLACK METAL AND GLASS TV STAND
www.insigniaproducts.com
Step 7: Install the shelf clips.
1Loosen the white plastic screws in the two glass clips (M) until the screws are almost all the way out of the clips.
2Push the two glass clips (M) into the holes in the back panel (I). Make sure that the beveled edges of the glass
clips face up and the plastic screws inside the clips face down.
3Use a Phillips screwdriver to turn the screw inside each glass shelf clip (M) 90° clockwise to lock the clips to the
legs.
Caution: Do not over tighten the glass shelf clip screws
You’ll need:
Beveled
edges
Plastic
screw
Plastic
screw
Phillips screwdriver
M (2)
NS-MG1344 MAN_15-0060_MAN_V4_EN-SP.fm Page 11 Monday, February 9, 2015 10:28 AM