Insignia NS-PDVD10 10.2" Personal DVD Player

Troubleshooting

If you experience the following problems while using the player, this troubleshooting guide can help you.

No sound

Make sure that the player is connected securely to the TV or amplifier.

Make sure that the volume of the headphone is set to MIN when using headphones.

Make sure that you operate the TV or amplifier correctly.

Make sure that you have selected the DVD player position on the amplifier.

No image

Make sure that the player is connected securely to the TV.

Make sure that you operate the TV correctly.

Make sure that you set the color system correctly.

Bad sound quality

Make sure that the audio output mode is set correctly.

Make sure that the audio connection between the player and amplifier is correct.

Disc cannot be played

Make sure that there is a disc in the player.

Make sure that the disc is placed on the disc tray correctly, with the label side up.

Make sure that the disc is clean.

If moisture has condensed in the player, remove the disc and leave the player on for about one hour.

Remote control does not work

Remove barriers between the remote control and the player.

Point the remote control at the remote control sensor of the player.

Replace the batteries with new ones.

Image rolls and has no color

The color system of the player does not match with that of TV. Select the correct TV TYPE until TV shows normal color.

36www.insignia-products.com