Setting up the connection between the nano receiver and keyboard
1 Plug the nano receiver into the USB port on your computer.
2 The computer automatically detects your keyboard and you can
immediately begin using it.
If the keyboard does not work:
• Move your computer and keyboard closer together.
• Re-plug the nano receiver into the USB port on your computer, then press
the connect button on the keyboard. The LED indicator on the keyboard
ashes steadily while in pairing mode (10 seconds). After pairing
successfully, the LED indicator lights solid for 10 seconds, then turns o.
• Check the batteries in your keyboard. The LED indicator blinks for 10
seconds when the batteries are low.
LED indicatorLegal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RSS-Gen and RSS-210 statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 statement
This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies
pour un environnement non contrôlé.
One-year limited warranty
For complete warranty, visit www.insigniaproducts.com.
Contact Insignia
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies. Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved. Made in China
LED indicator
Cleaning your keyboard
• Wipe the keyboard with a damp, lint-free cloth.
Specications
Keyboard:
• Dimension (L×W×H): 17.1 × 5.6 × .8 in. (43.4 × 14.3 × 2.06 cm)
• Weight: 16.9 oz. (.5 kg)
• Radio frequency: 2.4Ghz
• Operating distance: 33 feet (10 meters)
• Key number: 104 keys (US)
• Battery: 2 × AAA alkaline batteries
• Battery life: 6 months (based on average usage)
Nano receiver:
• Dimension (L×W×H): .7 x .6 x .2 in. (1.8 × 1.4 × .6 cm)
• Weight: .04 oz. (.001 kg)
• Interface: USB 1.1, 2.0 , 3.0
Troubleshooting
My keyboard is not working.
• Move your keyboard closer to your computer.
• Make sure that your computer meets the system requirements.
• If your keyboard stops working:
• Make sure that your keyboard and nano receiver are paired by pressing
the connect button on the keyboard.
• Replace the keyboard batteries.
• Try connecting your nano receiver into a dierent USB port on your
computer.
Function
Power ON
Low battery
warning
Pairing
Pairing failed
Paired
successfully
Description
Red LED is on for 10 seconds, then turns o.
Red LED blinks for 10 seconds.
Red LED blinks for 10 seconds after pressing
the Connect button.
After pressing the Connect button, the LED
blinks for 10 seconds, then turns o.
After pressing the Connect button, the LED
blinks, then lights solid for 10 seconds.
V3 ENGLISH 14-0237
NS-PNK5011_NS-PNK5011-C_14-0237_QSG_V3_EN.ai 2 3/11/2014 1:35:33 PMNS-PNK5011_NS-PNK5011-C_14-0237_QSG_V3_EN.ai 2 3/11/2014 1:35:33 PM