Step 4 Using your radio
Setting the time
1Press and hold TIME SET until the hour blinks on the display.2Press TIME+ or TIME– to set the hour.3Press TIME SET. The minutes blink on the display.4Press TIME+ or TIME– to set the minutes.5Press TIME SET to store the setting.Setting the alarm
1Press and hold ALARM 1 (or ALARM 2 depending on the alarm you are setting) until the hour blinks on the display.
2Press TIME+ or TIME– to set the hour.
3Press ALARM 1 (or ALARM 2 depending on the alarm you are setting). The minutes blink on the display.
4Press TIME+ or TIME– to set the minutes.
5Press ALARM 1 (or ALARM 2) to store the setting.6Press ALARM 1 (or ALARM 2) repeatedly to set the alarm mode. Settings include:•Wake to buzzer—
appears below the alarm icon.•Wake to 
Turning off the alarm
•Press any button other than SNOOZE/DIMMER to turn off the alarm while the alarm is sounding.
The alarm will be set for the same time the following day.If you do not want to set the alarm for the next day, press ALARM 1 or ALARM 2 repeatedly until the alarm icon disappears from the display.
Using snooze
•While the alarm is sounding, press SNOOZE/DIMMER. The alarm turns back on automatically nine minutes later.
•To cancel snooze (the alarm will not turn back on), press any button other than SNOOZE/DIMMER.
The alarm will be set for the same time the following day.
Playing the radio
1Press RADIO ON/OFF to turn on your clock radio.•To select the radio band you want to listen to, press AM/FM.•To tune the radio up or down and select the station you want, pressTUNING+ or TUNING–.
•To auto search for stations, press and hold TUNING+ or TUNING– for more than two seconds.
•To adjust the volume, press VOLUME+ or•To tune to the next preset station, press PRESET+ or to tune to the previous preset station, press
Setting and using station presets
1Press RADIO ON/OFF to turn on your clock radio.
2Press AM/FM to select the radio band you want to listen to.3Press TUNING+ or TUNING– to tune the radio up or down and select the station you want.
4To save the station as a preset, press PRESET MEMORY. “MEM” and “01” blink on the display.
5Press PRESET+ or PRESET– to select the preset number you want to assign to that station.
6Press PRESET MEMORY again to confirm the setting. The station is stored in memory.
7Repeat Steps 3 through Step 6 to store as many as ten AM presets and ten FM presets.
8To select a preset station, briefly press PRESET+ or PRESET– repeatedly until you reach the station you want. “MEM” appears on the display, along with the preset number selected and the station frequency.
Projecting the time
1Switch off the room lights to darken the room.2Press PROJECT to turn the projector on.3Turn the projector unit slowly to aim the projected image on the wall or ceiling.
4If the image appears to be upside down on your wall, or upside down on the ceiling when you are lying in bed, press ROTATE to rotate the projected image.
5If the image appears fuzzy and out of focus, slowly rotate the focus adjustment ring clockwise or
Troubleshooting
Problem | Solution |
|
|
| The display is off | Make sure that the |
| to radio and the |
| a power outlet. |
|
|
| No sound | Increase the volume and make sure that the radio |
| is on and tuned to a radio station. |
|
|
| The sound has | Make sure that the radio is not too close to a TV |
| interference | or other appliance. |
|
|
| The LCD display | Adjust the backlight. |
| is too dim |
|
|
|
| Radio reception | The AM bar antenna is inside the cabinet. If AM |
| is weak | reception is weak, change the position of cabinet |
| until the internal antenna picks up the strongest |
| signal. The FM antenna is at the back of the cabinet. |
| If FM reception is weak try varying the position and |
| direction of the FM antenna until you find the |
| strongest signal. |
|
|
Specifications
| Power supply | DC IN 6V/0.5A |
|
|
| FM band | 87.5 - 107.9 MHz in 200 KHz steps (USA) |
|
|
| AM band | 530 - 1710 KHz in 10 KHz steps (USA) |
|
|
| Output power | 1 W |
|
|
| Speaker | 2.25" x 1 |
|
|
| Operating temp. (Max) | 14° ~ 104°F |
|
|
90-day limited warranty
Visit www.insigniaproducts.com for details.FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. | ENGLISH |
Registered in some countries. All other products and brand names are trademarks of their respective owners. |