4
www.insigniaproducts.com
Setting up your speaker system
To set up your speaker system for Bluetooth:
1Place the speaker system on a flat stable surface. Make sure that your speaker system is at least 5feet
(1.5meters) away from a video device such as a TV or computer monitor because your speaker system is not
video shielded. An unshielded video cable can cause video distortions or permanently damage a video display.
2Plug the cable attached to the left speaker into the L jack on the subwoofer.
3Plug the cable attached to the right speaker into the R jack on the subwoofer.
4Plug the power cord attached to the subwoofer into a power outlet.

Turning your speaker system on or off

To turn your speaker system on or off:
• To turn on your speaker system, press the
Power/pairing button for about half a second.
Your speaker system turns on and automatically
enters pairing mode. The blue LED blinks rapidly.
• To turn off your speaker system, press the
Power/pairing button for about half a second.
Your speaker system and the LED turn off.
Notes
• When unplugging the power cord, pull the plug and not the cable.
• We recommend using a surge protector.
• Do not bundle the power cord with the speaker cables to avoid audio distortion.
Left speaker
Right speaker
Subwoofer
Note
Your speaker system stays in pairing mode for 10 minutes, then exits
pairing mode (the blue LED blinks slowly). To start pairing mode again,
press the Power/pairing button for three seconds.
NS-PSB4521_NS-PSB4521-C_14-0387_MAN_V4_ENG.book Page 4 Wednesday, July 2, 2014 8:07 AM