Insignia NS-R20C Round Tube TV

Connecting an S-Video device

3 Press CH or CH to highlight

SOURCE.

 

4

Press VOL

or VOL

on the remote

 

 

control or VOL or VOL on the front of

S-Video device

 

your TV to select AIR (outside antenna) or

To L audio out (white)

 

CABLE (cable TV).

 

 

 

 

 

To R audio out (red)

Memorizing channels

 

To S-Video out

When you memorize channels, your TV scans

 

for available channels in your viewing area and

 

stores the channel information in memory.

 

To memorize channels:

 

 

1

Press MENU. The on-screen display (OSD)

 

 

opens.

 

 

Audio cable

2

Press MENU one or more times to highlight

 

Tuning.

 

 

 

 

 

 

 

3

Press CH

or CH

to highlight AUTO

 

 

SEARCH.

 

 

L AUDIO (white)

R AUDIO (red)

S-VIDEO

To connect an S-Video device:

1Plug an S-Video cable into the S-VIDEOjack on the back of your TV, then plug the other end of the cable into the S-VIDEO OUT jack on the S-Video device.

2Plug the left and right audio cables into the AUDIO L and AUDIO R jacks on the back of your TV, then plug the other ends into the left and right AUDIO OUT jacks on the device.

Using your TV

Turning your TV on and off

To turn your TV on and off:

1Plug the power cord into a power outlet.

2Press POWER.

Note

The power indicator turns off when your TV is active.

The power indicator turns red when your TV is in standby mode.

If your TV has a blue screen or a screen saver displayed, your TV goes into standby mode after five minutes.

Selecting the TV signal source

To select the TV signal source:

1Press MENU. The on-screen display (OSD) opens.

2Press MENU one or more times to highlight Tuning.

4Press VOL or VOL on the remote control or VOL or VOL on the front of your TV to start scanning for channels. This process may take several minutes.

5If you want to stop scanning, press MENU.

Deleting a memorized channel

If you to skip a channel when you use a channel buttons, you can delete the channel from memory.

To delete a memorized channel:

1Tune to the channel you want to delete.

2Press MENU. The on-screen display (OSD) opens.

3Press MENU one or more times to highlight Tuning.

4Press CH or CH to highlight DELETE CH.

5Press VOL or VOL on the remote control or VOL or VOL on the front of your TV to select YES.

Changing channels

To change channels:

•Press CH or CH .

Or, press the number buttons to enter the channel number. For example, to select channel 12, press 1 then press 2. The channel changes in about 1.5 seconds. If you press 0 before you press 1, the channel changes immediately.

Adjusting the picture

To adjust the picture:

1Press MENU. The on-screen display (OSD) opens.

2Press MENU one or more times to highlight Picture.

3Press CH or CH to highlight the option you want to adjust. You can select

BRIGHTNESS, CONTRAST, COLOR, SHARPNESS, TINT, or COLOR TEMP.

www.insignia-products.com

5