Insignia NS-R20C Round Tube TV

Connecting a standard video device

Warning

Do not throw batteries into fire. Dispose of used batteries as hazardous waste.

Caution

Do not drop or disassemble the remote control. Do not get the remote control wet.

Caution

When the remote control will not be used for a long period of time or when the batteries are word out, remove the batteries to prevent leakage.

Non-S-Video device To video out (yellow) To L audio out (white) To R audio out (red)

Connecting an outside antenna or cable

TV

To connect an antenna or cable TV:

1Plug a 75-ohm cable into the antenna jack on the back of your TV.

2Plug the other end of the cable into a cable TV or outside antenna source.

Note

If you use a 300-ohm flat cable, you need to connect a 300-to-75-ohm converter to the flat cable, then connect the converter to the antenna jack on the back of your TV.

We recommend using a 75-ohm cable to reduce interference caused by radio waves.

R AUDIO (red)

L AUDIO (white)

VIDEO (yellow)

Headphones

To connect a standard video device:

1Plug a video cable into the VIDEO jack on the front of your TV, then plug the other end of the video cable into the VIDEO OUT jack on the video device.

2Plug the left and right audio cables into the AUDIO L and AUDIO R jacks on the front of your TV, then plug the other ends into the left and right AUDIO OUT jacks on the device.

4

www.insignia-products.com