Insignia NS-S6501

6.5'' Car Stereo

Speakers

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-S6501 Car Stereo Speakers represent the state of the art in car speaker design, and are designed for reliable and trouble-free performance.

Safety information

This User Guide contains important instructions for your safety. Make sure that you refer to it.

Do not install the speakers where they may be subjected to excessive heat, moisture, or dust, or where they will be kicked repeatedly, brushed, or bumped.

To prevent a short circuit, never leave any metal objects, such as coins or metal tools, inside the acoustic system.

Make absolutely sure that the positive (+) and negative (-) terminals of the speakers are connected to the correct outputs from the music source.

Never run the wiring on the outside of, or under, the vehicle, where it can be damaged by road hazards or moving parts of the vehicle. Use existing wire channels, sills, panels, and moulding strips inside the vehicle to hide the wiring for safety and a neat appearance.

When your speakers are connected, turn on the various components and slowly turn up the volume. Make sure that you check and double-check all connections to insure correct installation and use.

Do not overload the speakers beyond their nominal power handling capacity.

Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speakers to protect them from damage caused by the magnets in the speakers.

If you cannot find an appropriate mounting location, consult your car or sound system dealer before mounting.

Warning

Before mounting the speakers and connecting the wires, make sure that the negative battery cable is disconnected from the battery. Failure to do this may cause a short circuit or fire.

Use extreme caution when working near the gas tank, gas lines, or hydraulic lines with electrical wiring.

Features

Included:

6.5'' speakers (2)

Speaker wire mounting leads

Mounting screws (8)

Mounting clips (8)

Dimensions

7.09 in (180 mm)

45°

 

6.22 in (158 mm)

 

 

 

 

0.16--.18 in (4-4.5 mm)

2.05 in (56 mm) 1.61 in

(41 mm)

3.15 in

(80 mm)

5.02 in

(127.5 mm)

Troubleshooting

Always test the speakers and speaker wires. Make sure that the speakers are connected with the correct polarity (positive (+) amplifier output to positive (+) speaker terminal and negative (-) amplifier output to negative (-) speaker terminal).

www.insignia-products.com

3