Using your tripod1 Unscrew (turn counter-clock wise) the lock screw to release the ball head.
2 Align the bottom of your camera with the tripod mounting screw, then
secure your camera by rotating the ball head counter-clockwise. Make
sure that the screw is tight.
3 M ove the ball head to point the camera into position, then screw (turn
clockwise) the lock screw against the ball head to lock it in place.
4 Wrap all three tripod legs completely around a secure object or place on
the oor or a tabletop.
Caution: Not wrapping the legs completely around an object, or
attaching to an unsteady object, could result in damage to the tripod or
equipment mounted on the tripod.
5 To remove your camera from the tripod, unscrew the lock screw to release
the ball head, then hold the camera in place and rotate the ball head
clockwise.
Important safety instructions• Do not store or expose your tripod to excessive heat or cold, or use near
any ame or re.
• Do not oil or grease any part of the tripod.
• Do not use any solvents or thinners to clean your tripod. Use only a mild
detergent and wipe dry with a soft, lint-fee cloth.
• Do not exceed the load limit (1.8 lb or 0.8 kg) of this product.
Specications• Folded height: 6" (15 cm)
• Load capacity: 1.8 lb (0.8 kg)
• Weight: 1.8 oz. (52 g)
• Mounting screw: 1/4"
V1 ENGLISH 13-0930
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
“Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne
doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
“Cet équipement est conforme à l’exposition aux rayonnements IC limites établies pour un
environnement non contrôlé.”
One-year limited warranty
For complete warranty, visit www.insigniaproducts.com.
Contact Insignia
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2013 BBY Solutions, Inc. All Rights Reserved.