18
NS-SH513 Bluetooth/CD Compact Shelf System
www.insigniaproducts.com
Using a USB device
To listen to a USB device:
1Connect the USB flash drive to the unit.
2Press SOURCE one or more times or press USB on the remote control.
“USB” appears on the display and the player automatically detects the
device. If the device is found, the player automatically starts playback.
3To exit USB mode switch to another mode using the remote source
buttons or the SOURCE button on the unit.
Using an AUX device
To connect an AUX device:
1Make sure that your compact shelf system is turned off.
2Plug one end of an RCA stereo audio cable (included) into the AUX IN
jack on the back of your unit and into the audio out or line out jack on
the audio device.
3Press SOURCE one or more times until “AUX” appears on the display or
press AUX on the remote control.
4Use the controls on the audio device to control playback.
Note
The playback method is the same as it is for CD.
Note
• USB-Extension cable should have a max. length of 1.6 ft.
(0.5 m).
• Depending on the amount of data and the media speed,
it may take longer for the system to read the contents of
the USB device. In some cases, reading time may be as
long as 60 seconds. This is not a malfunction.
• Even when the files are in a supported format, some may
not play or display, depending on the content.
• The file formats that this system can play are MP3, WMA
with .MP3 and .WMA extensions.
Note
You can also use the volume controls on the device to adjust the
volume, but the volume knob on your compac t shelf system
provides the best control.
NS-SH513_14-1143_MAN_V2_ENG.fm Page 18 Tuesday, October 14, 2014 4:09 PM