Welcome

Thank you for your purchase of the NS-TVM101 wall mount. It is a full-motion mount that allows the TV or monitor to tilt ±15°, swivel ±15°, and extend 8.8 inches (22.4 cm) from the wall. The cable tunnels can hide cables and can be cut and painted to any desired size and color.

PARTS LIST

Before starting assembly, verify that all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer, but contact Customer Service. Never use damaged parts. Missing parts? Call (877) 467-4289.

2 Flat Back Panel
Attach the TV bracket (for TVs with flat back panels)

Tip: Determine the diameter of the screw your TV requires by hand threading them into the threaded insert on the back of your TV. Stop immediately if you encounter any resistance.

6 Drywall
Install the cable clips on the drywall

[26]DD

Note: Not all parts will be usedATV bracket (1)BWall bracket (1)CLag bolt (2)DHinge caps (6)ESwivel head bearing (1)FSwivel head washer (1)GSwivel head nut (1)H1/4" × 3.25" (82.6 mm) bolt (1)IM6× 0.78" (20 mm) bolt (4)JM4 × 0.47" (12 mm) bolt (4)KM5 × 0.47" (12 mm) bolt (4)LM6 × 0.47" (12 mm) bolt (4)MM4 × 1.18" (30 mm) bolt (4)NM5 × 1.18" (30 mm) bolt (4)OM6 × 1.38" (35 mm) bolt (4)PPlastic 0.5" (12.7 mm) washer (1)Q0.5" (12.7 mm) washer (2)RM4/M5 washer (8)SM6 washer (4)TM4/M5 spacer (4)UM6 spacer (4)VAllen (hex) wrench (1)AACable cover (1)BBCable cover screw (2)CCCable tunnel (3)DDCable clip (6)EECable tunnel connector (2)FFWall anchor for cable clip (12)GGWall screw (12)HHScreen cleanerIIMicro-￿ber cleaning clothJJ9' In-wall rated HDMI cable (1)Tools you will need:•Power drill•3/16" wood drill bit•Phillips screwdriver•Level•Socket wrench with 1/2" socket•Pencil, awl, or other marking tool•Stud finder

5/16 x 2.5

M4 x 12mm

1/4-20 x 3.25 in.

M6 x 20mm

M5 x 12mm

M6 x 12mm

M4 x 30mm

M5 x 30mm

M6 x 35mm

Plastic

Metal

 

 

0.5 in.

0.5 in.

 

 

 

 

 

 

 

M4 / M5

M6 / M8

M4 / M5

 

 

M6 / M8

AA

BB

CC

 

 

8-32 x 0.5 in.

DD

EE

FF

GG

HH

II

JJ

Rounded or Angular Back PanelTVs
Attach the TV bracket (for TVs with rounded or angular back panels)

Tip: Determine the diameter of the screw your TV requires

by hand threading them into the threaded insert on theOPTIONAL back of your TV. Stop immediately if you encounter any

resistance.

Optional: Use washer (R) with M4 or M5 hardware only.

3 Mount the TV bracket to the wall bracket

[05]

[09]

[11]

[10]

[11]

HEAVY! You will need

assistance with this step.For clarity, TV and face plate are not shown.

[05]

[06]

[07]

[02]

[08]

1”

[29]FF

[28]GG

3/16 in. 5mm
7 Connect cable covers CC and EE.

 

 

Route cable. Install cable covers

 

 

CC to DD.

2x

CC

 

 

[27]

 

 

EE

 

 

[29]

DD

[28]

CC[27]

3/16 in. 5 mm
Important safety instructions

The NS-TVM101 TV mount is designed to support a TV or monitor weighing up to 40 lbs. (18.1 kg) mounted on a vertical wall.

Caution

Do not use this product for any purpose not explicitly speci￿ed by Insignia. Improper installation may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the installation, contact Customer Service or call a qualified contractor. Insignia is not responsible for damage or injury caused by incorrect installation or use.

Warnings

•The weight of your television must not exceed 40 lbs. (18.1 kg). The wall must be capable of supporting five times the weight of the television, plus the wall mount. If you are unsure if your wall is capable of supporting this weight, contact Customer

Service or a qualified contractor.

•This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.

Three year warranty

Visit www.insigniaproducts.com for details.

1 Wood StudWall
Attach the wall bracket to a wood stud wall

Warning: To avoid potential injuries or property damage, any material covering the wall must not exceed 5/8" (16 mm).

Caution: Do not over-tighten the lag bolts (C).

Tighten the lag bolts (C) only until they are pulled ￿rmly against the wall bracket (B).

[05]

[05]

Conceal the cables in the arm

For clarity, TV is not shown.

4 Route the cables through the arm, leaving

 

enough slack to prevent stretching the cable

 

when the arm is moved.

 

AA BB

AA BB

NS-TVM101TV Mount Kit (includes HDMI cable)

 

63.5 mm

< 16 mm

(2.5 in.)

 

(5/8 in.)

 

[02]

[05]

3/16 in. 5mm

[12]

[02]

5 Use the head adjustment nut (A) to set the tension required to tilt the TV and the arm adjustment (B) to set the tension required to swivel or rotate the arm.

[B]

[A]

[B]

USER GUIDE

© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.

ENGLISH 09-0878

6907-002003 <00>