Insignia NS-TVMFP23, NS-TVMFP23-C STEP 2 - Select screws, washers, and spacers

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in.

www.insigniaproducts.com

STEP 2 - Select screws, washers, and spacers

Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with

mounting hardware included. (If there are screws that came with the TV, they are almost always in the

holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV

requires, test various sizes by hand threading the screws.

Select one of the following types of screws:

For a TV with a flat back:

M5 X 12mm screws (D)

M6 X 12mm screws (I)

M6 X 20mm screws (J)

M8 X 16mm screws (L)

M8 X 20mm screws (M)

For a TV with an irregular/obstructed back:

M5 X 35mm screws (E)

M6 X 35mm screws (K)

M8 X 35mm screws (N)

Select either an M5 washer (F) or an M6/M8 washer (G)

For an irregular or obstructed TV back, also use Spacer (H)

CAUTION: To avoid potential personal injuries and property damage, make sure that there are

adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and

contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using

hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to

fall from the mount.

Remove the screws.

For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back“ on

page 7.

-OR-

For an irregular or obstructed back, go to “STEP 3 - Option 2: Attaching the mounting hardware to TVs

with irregular or obstructed backs” on page 8.

Screw fits

correctly

Screw is too

long Screw is too

short

NS-TVMFP23-NS_TVMFP23-C_14-0745_MAN_V2_ENG.fm Page 6 Sunday, August 10, 2014 10:17 PM