Insignia NS-UPDVD manual 10

Insignia NS-UPDVD 1080p Upconvert DVD Player

2 Activate your player’s digital output. (See					8 Press OPEN/CLOSE (		) to close the disc
	“AUDIO SETUP” on page 11).					tray, or press POWER (	). The disc tray
Digital multi-channel sound						closes automatically and the player turns off.
A digital multi-channel connection provides the
						Note
best sound quality. For this, you need a						If parental controls are set and the DVD is not
multi-channel audio/video receiver that supports						within the rating settings, you must enter the
one or more of the audio formats supported by						password. See “SYSTEM SETUP” on page 11.
your player, including MPEG 2, Dolby Digital,					Playback options
and DTS. Check the receiver manual and the
logos on the front of the receiver to verify this.					Menu play
					To play a DVD using the disc menu:
	Note
	• If the audio format of the digital output does not				1 With a disc in the player, press MENU. The
	match the capabilities of your receiver, the					DVD menu opens.
	receiver will produce a strong, distorted sound
					2 Make your selection from the menu, then
	or no sound at all.
	• To play six-channel digital surround sound					press ENTER to start playback.
	through a digital connection, your receiver must					On some DVDs, press MENU repeatedly to
	have a digital multi-channel decoder.
						return to the root menu.
	• To see the audio format of the current DVD
	displayed on the screen, press AUDIO.					- Or -
	• Your player does not perform internal				1 Press TITLE. The DVD menu opens.
	(2-channel) decoding of DTS sound tracks. To
	enjoy DTS multi-channel surround, you must				2 Make your selection from the menu, then
	connect your player to a DTS-compatible
						press ENTER to start playback.
	receiver through one of your player’s digital
						On some DVDs, press TITLE repeatedly to
	audio outputs.
						return to the root menu.
Using your DVD player
						To play a VCD 2.0 disc, press PBC to turn the
Turning your player on and off						menu on or off, then press RETURN to return
						to the menu.
To turn your player on and off:					Program play
					Program playback lets you enter the order in
1 Plug the power cord into the back of your
	player and into an electrical outlet.				which a disc will play chapters or tracks.
2 Press the POWER button to turn on your					To play a DVD, CD, HD-CD, or JPEG disc
	player.
					using program play:
3 Press the POWER button again to turn off					1 With a disc in the player, press PROGRAM.
	your player.					The Program selection box opens.
Playing a disc						DVD and JPEG discs
To play a disc:
1 Turn on your player and your TV.
2 Press OPEN/CLOSE (		) to open the disc
	tray.
3 Load the disc into the tray, with the label side
	up.
4 Press OPEN/CLOSE (		) to close the tray.				CD and HD-CD discs
	Playback starts automatically. If playback
	does not start, press PLAY (		) on the
	remote control or PLAY/PAUSE			on the
	player to start the playback.

5To stop the playback, press STOP ( ).

The player notes the stopped point, depending on the disc, and “Pre Stop” appears on the screen.

6	Press PLAY ( ) to resume playback (from			2	Press	/	/	or	to navigate the menu,
					then press the number buttons to enter the
	the stopped point). To start playback from the
					Chapters or Tracks you want to play, in the
	beginning of the disc, press STOP (		)
					order you want to play them.
	again, then press PLAY (	). Your player		3
					Press	/	/	or	to select PLAY, or
	starts playback at the beginning of the disc.
7	Press OPEN/CLOSE (	) to open the tray,			press PLAY, then press ENTER to begin
					programmed playback.
	then remove the disc.
				4 During playback, press PROGRAM to display
					the program order on the screen.
					• To clear the program, press /					/ or
						to select CLEAR, then press ENTER.
10		www.insignia-products.com