Quick Setup Guide

NS-WBRDVD2/NS-WBRDVD2-CA for Wireless Blu-ray Disc Player and NS-BRDVD4/NS-BRDVD4-CA for Wired Blu-Ray Disc Player

Congratulations on your purchase of a high-quality Insignia product. Your NS-WBRDVD2, NS-WBRDVD2-CA, NS-BRDVD4, and NS-BRDVD4-CA represents the state of the art in Blu-ray disc player design and is designed for reliable and trouble-free performance.

Package contents

•

Blu-ray disc player

•

AAA batteries (2)

•

Remote control

•

User Guide

•Quick Setup Guide

Installing remote control batteries

1Remove the battery compartment cover.

2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.

3Replace the battery compartment cover.
For the most updated User Guide, please visit
www.insigniaproducts.com

Distributed by Best Buy Purchasing, LLC

7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645

©2011 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of

their respective owners.

Connecting a TV

Using HDMI (best)

TV

Back of player
Digital connection (optical or coaxial)
NOTE: To select the digital audio output mode, see page 15 of the User Guide.

TV

Back of player

Optical cable
Using composite (good)
NOTE: Composite connections do not provide HD quality video.

TV

Back of player

Yellow=Video
White=Left audio
Red=Right audio
To connect to a home theater, see your User Guide.

Using Quick Setup

•Press or to select Quick Setup, then press ENTER. The Quick Setup menu opens.

Follow the guide to set the most important settings for your player.

Music

Connecting to your home network

This player can be connected to your wired network using the Ethernet port on the back of your player or using a wireless network. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.

Connecting to the Internet with a wireless network (NS-WBRDVD2 and NS-WBRDVD2-CA only):

1Set up your access point or wireless router (if not already set up).
Player
Wireless router
2Turn on your player and your TV.
3Press or to select Settings, then press ENTER. The Settings menu opens.
4 Press or to select Network, then press ENTER.

 

Language

 

 

Parental

Wireless

 

System

Network List

Settings

Network

WiFi Protected Setup(WPS)

Manual

 

BD-Live

 

IP Settings

 

Display

 

 

 

Audio

 

Note: The screen shot is only for wireless players.

5Press or to select Network List, then press ENTER. The Network List screen opens, showing a list of available wireless networks.

6Press or to select the wireless network you want your player to connect to. A Network Setup screen opens with the following options: Password, Connect, Delete, or Cancel.

7If your network does not use encryption, press or to select Connect, then press ENTER. If the wireless network is working you should see a checkmark and a connected message on the TV. If the message does not appear, repeat the steps above.

OR

If your network uses encryption:

a Press or to select the Password field, then press ENTER. An on-screen keyboard opens.

b Press , , , or to select the first letter in the password, then press ENTER. Repeat this step to enter the rest of the password. If you make a mistake, use backspace key to delete the character.

c After you enter the password, select the red “DONE” in the upper left-hand corner of the keyboard, then press ENTER to close the keyboard.

d Press or to select Connect, then press ENTER. A connection message will appear. Select Close, then press ENTER. If the connection is not successful, repeat the steps above.

For information on connecting to a wireless network using Wi-Fi Protected Setup (WPS), see your User Guide.