Quick Setup Guide
Connected Blu-ray Disc Player I NS-WBRDVD3
Congratulations on your purchase of a
Package contents
• |
| • | AAA batteries (2) |
• | Remote control | • | Quick Setup Guide |
• | Important Information Document | ||
Installing remote control batteries
1Remove the battery compartment cover.
2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.
3Replace the battery compartment cover.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com, click Support & Service, enter your model number in the Product Search field, then click Search.
Connecting a TV
Using HDMI (best)
Back of player
TV
Using an AV cable
Note: The AV cable can only send standard-definition video (480i) to your TV.
Back of player
TV
Yellow=Video
White=Left audio
Red=Right audio
A/V cable
Navigating Quick Setup
•Any of these settings can be adjusted later using the SETTINGS menu.
•Services such as streaming video and music require an internet connection. If connecting now, make sure that your network connection is ready before proceeding. This also lets you receive automatic firmware updates.
•When there is no disc in your player or your player is in stop mode, the HOME menu is automatically displayed.
1Press , , , or to select QUICK SETUP, then press ENTER.
Page: 1/6 | Quick Setup |
Welcome to Quick Setup
Press ENTER to perform setup of basic settings for your player.
Connecting to your home network
You can set up a network connection using the
This player can be connected to your wired network using the Ethernet port on the back of your player or using a wireless network. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Using a wired network connection:
Back of player
Network cable
Wired router
To connect to a home theater, see your online User Guide.
Connecting to the Internet with a wired network:
1Connect a network cable to the INTERNET jack on the back of your player and into a wired router using a commercially available LAN or Ethernet cable.
2Within the HOME menu, you can use , , , or buttons on the remote control to select the SETTINGS, and then press ENTER. The SETTINGS menu opens.
Display | TV Aspect Ratio | 16:9 Normal |
Audio | Resolution | Auto |
Language | HDMI Color Space | Auto |
Network | HDMI Deep Color | Auto |
System | HDMI 1080p 24Hz | Off |
Security | HDMI 3D | Auto |
Use cursor keys to highlight menu and | RETURN | HOME Exit | |
Enter key to select | |||
|
|
3Press to select NETWORK, then press ENTER. Under Connection Type option select WIRED, and press ENTER. A check mark appears in the upper right corner if the connection is successful.
ENTER Next Step