5
CORNER T V STAND
www.insigniaproducts.com
ASSEMBLY INSTRUCTIONS
Step 1: Preparing the legs and frame.
Caution: Do not fully tighten allen bolts (L) until Step 2.
1Screw four floor levelers (J) into the holes in the legs (A).
2Connect the slots on the legs (A) to the slots on the frame (B), and attach using four allen screws (K) with the
allen wrench (P).
Tips:
The back side of frame (B) is labeled "Back."
The top of the legs (A) and the top of the frame (B) should be flush when the parts are connected.
3Attach the support bar (C) to the legs using two allen bolts (L) with the allen wrench (P).
Tip: The hole in the support bar (C) should face up (see the arrow).
FRONT
You’ll need:
4 - Allen screws (K)
2 - Allen bolts (L)
4 - Floor levelers (J)1 - Allen wrench (P)
NS-WG1542_14-0295_MAN_V2_ENG.fm Page 5 Monday, April 28, 2014 7:32 AM