InSinkErator MOUNTING THE TANK - W152, MOUNTING THE TANK - W154, 34 lbs, 45 lbs, mounting only

2	MOUNTING THE TANK - W152
	A		The W152 model is designed for wall or
			floor mounting.
			■ Select a spot to mount water heater
			vertically, with water connection at
			the top.
			■ Water heater must be located within
			3-1/2 ft. of a grounded 120-volt
			electrical outlet.
	3½"
	B		■ Ensure wall or cabinet is strong
			enough to hold the weight of a full
			heater. The model W152 tank holds
		(full tank)	2-1/2 gallons and weights 34 lbs.
		34 lbs.	when full.
			Continue with “Step C” if wall mounting.

2

MOUNTING THE TANK - W154
A	The W154 model is designed for floor
	mounting only.
	■ Select a spot to mount water heater
	vertically, with water connection
	at the top.
	■ Water heater must be located within
	3-1/2 ft. of a grounded 120-volt
3½"	electrical outlet.
B	■ Ensure cabinet floor is strong
(full tank)	enough to hold the weight of a full
45 lbs.	heater. The model W154 tank
	holds 4 gallons and weighs
	45 lbs. when full.
	■ It is recommended the water heater
	be raised off the cabinet floor
	several inches using suitable
Property Damage: Do not connect the electrical	support blocks to allow drainage of
power until the tank is full of water. Failure to	tank (not supplied).
comply will burn out the heating element.

C

Property Damage: Do not connect the electrical

power until the tank is full of water. Failure to

comply will burn out the heating elements.

■Hold tank in the position to be mounted and mark with a pencil the top and center for the tank on the wall (mount to wall stud or

added 2x4).

■Measure down 1-1/2" and mount the metal mounting bracket using two screws provided.

■Hang the water heater from the mounting bracket using the two slots in the back of the tank jacket.

6 7