The Next
Necessity™
Instant Hot Water Dispensers
Model
H770-SS
The original instant hot water dispenser with •Hot Only – Dispenses
•35% more
•Easy to adjust temperature control
•
•Provides 60 cups/hr of
•
•120 volts, 750 watts, 6.25 amps
•Available in chrome with black handle
Capacity | |
| steel tank dispenses |
| 60 cups of 200˚F |
| water per hour |
|
|
Electrical | 120 volts A.C., 750 |
| watts, 6.25 amp |
| heating element |
| with grounded |
| three (3) prong plug |
|
|
Thermostat | |
| adjustable from |
| 160˚F to 210˚F |
| (factory |
| at 200˚F) |
|
|
Insulation | Meets U.L. |
| flammabiltiy |
| specification |
|
|
Valve | Instant, |
| |
| |
1/4" Incoming |
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
Minimum 2" required from sink hole center to backsplash
Instant hot water dispenser(s) shall be InSinkErator Model
Warranty:
Recommended | |
Supply Pressure |
|
|
|
Shipping Weight | Approximately |
| 7.4 lbs. |
|
|
Required | |
Hole Diameter | standard sink hole |
11"
NOTE: Max counter thickness is 1".
*The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
The Emerson logo is a trademark and service mark of Emerson Electric Co.
InSinkErator is a division of
Emerson Electric Co.
Printed in USA | © 2007 InSinkErator |