Integra DTR-7.7 1, 2, 3, 4, 5, 6 7

68

Advanced Setup—Continued

Speaker Distance

With these settings, you can specify the distance from

each speaker to the listening position.

Note:

• This procedure can also be performed on the AV

receiver by using its [Setup] button, arrow buttons, and

[Enter] button.

1Press the [Receiver] Remote

Mode button, followed by the

[Setup] button.

The main menu appears onscreen.

2Use the Up and Down [ ]/[ ]

buttons to select “3. Speaker

Setup,” and then press [Enter].

The Speaker Setup menu appears.

3Use the Up and Down [ ]/[ ]

buttons to select “Speaker Dis-

tance,” and then press [Enter].

The Speaker Distance menu appears.

Note:

Speakers that you set to No or None on

the Speaker Conﬁg menu (page 66)

cannot be selected.

These settings are set automatically by the Automatic

Speaker Setup function (see page 38).

3-3.Speaker Distance

------------------------

a.Unit :feet

b.Left :12.0ft

c.Center :12.0ft

d.Right :12.0ft

e.Surround R : 7.0ft

f.SurrBack R : 7.0ft

g.SurrBack L : 7.0ft

h.Surround L : 7.0ft

i.Subwoofer :12.0ft

4Use the Up and Down [ ]/[ ]

buttons to select “a. Unit,” and

then use the Left and Right

[ ]/[ ] buttons to select:

feet: Select if you want to enter

distances in feet. Can be set

from 1 to 30 feet in 0.5-foot

steps.

meters: Select if you want to enter

distances in meters. Can be

set from 0.3 to 9 meters in

0.15-meter steps.

5Use the Up and Down [ ]/[ ]

buttons to select each speaker

and then use the Left and Right

[ ]/[ ] buttons to specify the

distance.

Specify the distance from the speaker

to your listening position.

6Repeat step 5 for all speakers.

7Press the [Setup] button.

Setup closes.

Contents

Main Important Safety Instructions WARNING: CAUTION: WARNING AVIS Precautions Memory Backup For U.S. models CAUTION: NOTE: Supplied Accessories Make sure you have the following accessories: Remote controller and three batteries (AA/R6) Speaker setup microphone Indoor FM antenna AM loop antenna Contents Introduction Connection Turning On & First Time Setup Basic Operation Features Amplier Processing Audio/Video Tuner Before Using the AV receiver Installing the Batteries 3 1 2 Getting to Know the AV Receiver Front Panel 4 5 78 9JK L M N O6 ST UVQRP 12 3 T Display A B C D Rear Panel 7 8 9 J KL MN P Q R S 6 5 O T U O P Q R S Remote Controller 1 2 Page Page A B C D CD, MD, and CDR Modes B K D F 7 8 9 J E L Page Connecting Your Speakers Enjoying Home Theater Connecting Your SpeakersContinued Speaker Conguration Using Dipole Speakers Connecting a Powered Subwoofer Attaching the Speaker Labels 1 2 3 4 Connecting Antenna Connecting the Indoor FM Antenna 1 2 Connecting the AM Loop Antenna Connecting AntennaContinued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna Connecting Your Components Optical Digital Jacks AV Cables and Jacks AV Connection Color Coding About AV Connections Connecting Audio and Video Signals to the AV Receiver Which Connections Should I Use? With connection , you can listen to and record audio from your TV and listen in Zone 2. Connecting a TV or Projector Choose a video connection that matches your TV ( , , or ), and then make the connection. Choose an audio connection that matches your TV ( , , or ), and then make the connection. With connection , you can listen to and record audio from a DVD and listen in Zone 2. Connecting a DVD player Choose a video connection that matches your DVD player ( , , or ), and then make the connection. Choose an audio connection that matches your DVD player ( , , or ), and then make the connection. Hooking Up the Multichannel DVD Input 5.1 ch 7.1 ch Connecting a VCR or DVD Recorder for Playback Connecting a VCR or DVD Recorder for Recording bB With connection , you can listen to and record audio from the video source and listen in Zone 2. Connecting a Satellite, Cable, Set-top box, or Other Video Source Choose a video connection that matches the video source ( , , or ), and then make the connection. Choose an audio connection that matches the video source ( , , or ), and then make the connection. About HDMI Supported Audio Formats Connecting Components with HDMI Making HDMI Connections Connecting a Camcorder, Games Console, or Other Device Connecting a CD Player Connecting a Turntable Connecting a Cassette, CDR, MiniDisc, or DAT Recorder d Connecting a Power Amplier Step 1: Choose a connection that matches the recorder ( , , , or ), and then make the connection. Connecting an HDD-compatible Component Connecting the Power Cords of Other Components Connecting Components Connecting the Power Cord 1 2 Turning On the AV Receiver Turning On and Standby Smooth Operation in a Few Easy Steps First Time Setup Automatic Speaker Setup 3, 4 1 2, 5 3 4 5 Page HDMI Video Setup Component Video Setup * Digital Audio Input Setup Changing the Input Display 1 2 1, 21, 2 Minimum Speaker Impedance 3 TV Format Setup (not North American models) AM Frequency Step Setup (on some models) Playing Your AV Components Basic AV Receiver Operation 1 2 3 Listening to the Radio Displaying AM/FM Radio Information Tuning into AM/FM Radio Stations Listening to AM/FM Stations 1 2 3 2, 6 4 5 6 1 2 Selecting XM Radio Channels 2 1 2 3 1 Displaying XM Radio Information Positioning the XM Antenna 2 3 4 5 Selecting Presets 1 2 2 3 4 1 2 Using the Multichannel DVD Input Input Channel Subwoofer Sensitivity Using the Multichannel DVD Input Multichannel DVD Input Settings Common Functions Setting the Display Brightness Adjusting Speaker Levels 1 Muting the AV Receiver Common FunctionsContinued Using the Sleep Timer Using Headphones Displaying Source Information Using the Listening Modes Selecting on the AV Receiver Selecting with the Remote Controller Selecting the Listening Modes Page About the Listening Modes Onkyo Original DSP Modes Recording Recording the Input Source 1 2 3 Onscreen Setup Menus Main menu About the Onscreen Setup Menus p.41 p.42 p.43 p.44 p.66 p.71 p.72 Adjusting the Listening Modes Using the Re-EQ Function Audio Adjust Menu Tone Control Settings PL IIx and Neo:6 Settings 1 2 Dolby Digital Settings LFE Level Setting Mono/Multiplex Settings Mono Multiplex Default Listening Modes Advanced Setup Speaker Conguration Speaker Setup 1 2 7 8 9 10 11 1 2 3 4 5 1 2 3 4 5 THX Audio Setup Equalizer Settings 1 2 3 4 5 1 2 3 4 5 Preferences OSD Setup OSD Position 12V Trigger A/B/C Setup HDMI Setup Lock Setup 1 2 3 1 2 Digital Input Signal Formats Correcting Sound and Picture Sync 1 2 3 Zone 2 Using Another Amp in Zone 2 Using Only Speakers in Zone 2 Connecting Zone 2 Powered Zone 2 Setting Zone 2 Out Setting Controlling Zone 2 from the AV Receiver Controlling Zone 2 with the Remote Controller Using Zone 2 1 2 1 2 1 2 3 Adjusting the Volume for Zone 2 Adjusting the Tone and Balance for Zone 2 1 2 Using the 12V Triggers in Zone 2 and the Main Room Using a Multiroom Kit with Zone 2 Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with Other Components Using the Remote Controller in Zone 2 and Multiroom Control Kits Controlling Other Components Entering Remote Control Codes 1 2 3 1 2 3 1 2 Resetting the Remote Controller 1 2 A C D E F A C D E F A C D E F 1 1 1, 4 2 3 1 2 3 1 Troubleshooting Power Audio Video Tuner Remote Controller Others Recording Page Specication Amplier Section AM Video Section Tuner Section Page Page E * 2 9 3 4 4 3 3 7 A *