Intel 480T - page 105

Configuring Ports

This chapter describes how to configure ports on the Intel® NetStructure™

480T routing switch and covers these topics:

•Configuring Ports

•Changing Port Speed and Duplex Settings

•Jumbo Frames

•Load Sharing

•Jumbo Frames

•Port-Mirroring

•Enterprise Discovery Protocol

Configuring Ports

By default, all ports are enabled. To enable or disable one or more ports,

use this command:

[enable | disable] ports <portlist>

For example, to disable ports 3, 5, and 12 through 15 on the switch, enter

this:

disable port 3,5,12-15

Even though a port is disabled, the link remains enabled for diagnostic

purposes.