INTRODUCTION
The ET900 is available with a processor socket on board or with an
Intel® processor on board. In the case that your ET900 comes a Socket
479 processor socket for Intel® Pentium® M or Celeron® M processors,
follow the instructions below regarding the processor installation.
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting
the processor. Place the processor into the socket by making sure the
notch on the corner of the processor corresponds with the notch on the
inside of the socket. Once the processor has slide into the socket, fasten
the screw. Refer to the figures below.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
ET900 User’s Manual 5