Intel manual Intel Desktop Boards D815EEA2 and D815EPEA2 Specifications, Lan

Intel® Desktop Boards D815EEA2 and D815EPEA2 Specifications

Processor		LAN
Processors	Intel® Pentium® III processors with 133/100-MHz	Intel® PRO/100 Network Connection (integrated
Supported	system bus in the FC-PGA package	LAN; optional) RJ-45 connector with link and
	Intel® Celeron™ processors with 100/66-MHz	speed LEDs
	system bus in the FC-PGA package	Auto-negotiation of 10 BaseT and 100 BaseTX

Chipset Options

Intel® 815E Chipset	Intel® 82815 Graphics and Memory
(D815EEA2)	Controller Hub (GMCH) with AHA
	(Accelerated Hub Architecture) bus
	I/O Controller Hub (ICH2) with AHA bus
	Firmware Hub (FWH)
Intel® 815EP Chipset	Intel® 8215EP Memory Controller Hub (MCH)
(D815EPEA2)	with AHA (Accelerated Hub Architecture) bus
	I/O Controller Hub (ICH2) with AHA bus
	Firmware Hub (FWH)

Graphics/Memory Controller Hub (GMCH)

Accelerated Graphics Integrated Intel® 3D Graphics with support for

(D815EEA2)	additional 4 MB of Digital Display cache memory
	with GPA
	Includes Digital Video Output (DVO) header
	• Support for Digital Visual Interface
	(DVI) and TV output
	Supports 1x, 2x and 4x AGP 2.0 compliant
	graphics cards

I/O Controller Hub (ICH2)

ICH2 I/O	Ultra DMA/33
Controller Hub	Ultra ATA/100/66
	Six PCI request-grant pairs for support of
	six PCI Bus Masters
I/O Features	Integrated Super I/O LPC bus controller
	Five PCI Local Bus slots
	Power Management support for both ACPI
	1.0 & APM 1.2
	PC 99 and PC 99A Compliance
USB	Two USB controllers with four USB ports
	(Two dual stacked rear USB connectors)

Firmware Hub

System BIOS	4-Mb Flash EEPROM with Intel/AMI* BIOS
	featuring Plug and Play, IDE drive auto-configure,
	Advanced Power Management (APM) 1.2,
	ACPI 1.0, DMI 2.0, Multilingual support
Intel® Rapid	Optimized system initialization delivering
BIOS Boot	faster access to PC from power-on

System Memory

Memory Capacity	Three 168-pin unbuffered DIMM sockets
	for 32 MB (min) to 512 MB (max) SDRAM
Memory Type	PC100, 100-MHz both ECC and non-ECC
	(all system bus speeds) PC133, 133-MHz
	accepts both ECC and non-ECC
	(133-MHz system bus only)
Memory Voltage	3.3V

Audio

AC’97 integrated audio using the AD1885 codec

Hardware Management Features

Voltage sensor to detect out of range values

Two fan sensors used to monitor temperature and fan activity

Wake on LAN* (WOL)

Wired for Management (WfM) 2.0 compliant Support for system wake up using an add-in network interface card with remote wake up capability, integrated 82562ET network adapter, or PCI Slot 2

Expansion Capabilities

	Five PCI bus add-in card connectors (PCI)
	Local Bus Specification Revision 2.2
	One Communication and Networking Riser (CNR)
	connector shared with PCI slot 5 (optional)
	One universal AGP Port connector
Jumpers and Front Panel Connectors
Jumpers	Three-pin jumper block to set configuration
	mode for the BIOS Setup program
Front Panel	Reset, HD LED, Power LEDs, Power On/Off,
Connector	Standby header, IR Port, Aux LED
Mechanical
Board Style	ATX mounting holes and external connector
	placement
Board Size	11.5" x 8.2"
Environment
Operating Temp.	0° C to +55° C
Storage Temp.	-40° C to +70° C
Regulations
	Korean MIC mark and certification number
Safety Regulations
U.S. and Canada	UL 1950—CSA 950-95,
	U.S. and Canadian recognition
	component marks
Europe	Classified to IEC 950

EMI/RFI Regulations Intended for use in systems meeting the following EMI/RFI regulations:

U.S.	FCC Class B (DofC—Cover off testing)
Canada	IC Class B
Europe	EU Class B (Res, Com, Light Industry)
Japan	VCCI, Class B (ITE)

EEA (European Economic Area)

EN55022: 1998, uses CISPR 22 3rd edition

Power requirements vary with system configuration and use. Complies with US CRF via EN55022 + 6db in an open chassis and EU Directive 89/336/EEC via EN55022 and EN50082-1 in a representative chassis.

Ordering Information—See Intel’s Web site at www.intel.com

For the most current product information, visit Intel’s Web site at:

www.intel.com or program.intel.com/ibp/products/boards/

Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

The Intel® Desktop Boards D815EEA2 and D815EPEA2 may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

*Third-party brands and names are the property of their respective owners.

© 2001 Intel Corporation. All rights reserved. 0201/TB/RN