Intel Ethernet Switch Boards ThinkIO - I’ve got it all,  Memory,  Flexible Field Bus Selection

ThinkIO - I’ve got it all!

The ThinkIO is the combination of a complete PC (Intel® Pen-	 Memory
tium® MMX compatible 266 MHz processor) with the granular	Bootable Onboard Flash Disk:
WAGO-IO/-SYSTEM 750 and 753. The combination of the per-	32/128 MByte
fect connectivity and diversity of the Wago clamps with this	SDRAM: 32 MByte/128 MByte
DIN Rail PC provides the opportunity to realize new ideas.	RAM: 128 kByte, battery-buffered
	External Compact Flash type I/II
The optional IEC 61131-3 compliant PLC Programming System
CoDeSys provides the customer with an easy way to configure	 Flexible Field Bus Selection:
the ThinkIO.	PROFIBUS-DP Master/Slave
	CANopen Master/Slave
	DeviceNet Master/Slave
	 Dimensions: 160 x 70 x 95 mm
	 Available Software
	 PLC Programming System CoDeSys
	with Target Visualization
	 Linux 2.4 GPL BSP
	 Windows CE 5.0 BSP
	 OPC Driver
	 SOPH.I.A.
	 Delivered Devices are ready to use
	with pre-installed software.

With features like USB, Ethernet, RS232, DVI and external watchdogs in combination with field buses like PROFIBUS-DP, CANopen and DeviceNet, the ThinkIO offers an extraordinary connectivity.

System IO

2 Digital Input and Output Channels each opto-isolated 2x USB 1.1 Ports

1x RS232 Serial Port

2x 10Base-T/100BASE-TX Fast Ethernet ports

1x DVI panel-link, TFT, VGA (with adapter) External Watchdog

Run/Stop Switch Reset Button

System Processor

Geode™ SC1200 (266 MHz) and integrated Chipset from AMD Cache: 16 kByte 1st level

The WAGO-I/O-SYSTEM 750 and 753 are the smallest modularized, fieldbus independent, input/output sys- tems for decentralized automation. They facilitate the integration of cost and space saving I/O clamp nodes using application specific, intermixable, digital, analog and complex input/output modules.

The WAGO I/O System 753 offers all existing clamps with the additional advantage that it separates the clamps’ wire and function blocks

Fine Granularity: 1, 2, 4 or 8 channels in one bus-module

Safe Investment: fieldbus independent node design

Special Functions: different voltages, output power, and signals on one clamp

Furthermore, I/O clamps are available for Ex zone, Profisafe, step motors, Dali bus, valves and others

Safe Operation: Certification for industrial auto- mation, construction, shipboard automation and on/off shore applications guarantees a wide range of application possibilities (CE and GL approval)

ThinkIO and HMI

It is possible to connect Panels and Touchpanels directly to the ThinkIO via the DVI and USB interfaces. We suggest the 6.4" (640x480), 8.4" (640x480) and 10.4" (800x600) panels on page 81. The ready-to-use configuration means that with our displays, commu- nication between ThinkIO and the display can start immediately.

For visualization of a process, the Target

Visualization is implemented in CoDeSys.

Long distances between ThinkIO and Touchpanel on the machine can be solved by the Long Distance Monitor System. Up to 40 m can be bridged with this system (details see page 82).

DIN Rail PC / ThinkIO

CoDeSys Automation Alliance CAA

More than 60 companies belong to the CoDeSys Automation Alliance. The aim of this association is to achieve a standard within the IEC 61131-3, which helps to harmonize programs used in automation on independent hardware from different suppliers.

CoDeSys is a multi-function software tool for the automation industry; it covers many typical tasks in the field of plant and machine construction. CoDeSys offers a range of open interfaces for external soft- ware systems.

CoDeSys supports all five IEC 61131-3 languages and on top offers a sixth editor, which is a variation of the Function Block Diagram (FBD), called Continuous Function Chart (CFC).

Integrated Target Visualization

Integrated Web Visualization

Integrated Modbus TCP/IP protocol

Field bus support and configuration for Profibus-DP, CANopen and DeviceNet

Open Interfaces: OPC, HTTP, TCP/IP

Network variables by symbolic access via TCP or CAN

Tracing, logging, parameterizing watchdog properties

Offline simulation

Touch Panels, TFT Monitors	p. 80 f
Industrial Software, OPC drivers	p. 92 ff

64

65