3: Motherboard Configuration

JPSKMV1 PS/2 Voltage:

Default – 5V

Pin 1

JPSKMV1

Jumper JPSKMV1: PS/2 Standby Voltage

This jumper controls the voltage to the PS/2 keyboard and mouse ports. The default setting is for standard 5V operation. The alternate setting configures the PS/2 ports to also operate with a standby voltage of 5V. This allows the system to wake up from an S3 Suspend state. If you anitcipate using this Suspend mode, you should set this jumper to the alternate setting.

JPSKMV1: PS/2 Standby Voltage

Setting

Function

Short 1-2

PS/2 Voltage 5-Volt [Default]

Short 2-3

PS/2 Standby Voltage 5-Volt

User’s Manual

3•5