mP4G/mP4GL Motherboard
PnP/PCI Configurations
Section Function
Configures Plug and Play and other PCI bus settings.
Default & Autodetected Settings
The default is for the BIOS to control these functions.
Setting Options & Constraints
If you have a problem after you install an expansion card, set “Reset Configuration Data” to Enabled to rewrite the ESCD.
Don’t change the resource settings, they’re set to be handled automatically by the BIOS. While you can set them manually, there shouldn’t be any need to do so.
The PCI/VGA Palette Snoop item is for PCI display cards that have a problem displaying a screen image properly at startup. You should not need to use this feature since the onboard display is the primary display and if you disable it, the AGP slot will be primary on the mP4G.
CMOS Setup Utility – PnP/PCI Configurations
5•18 | User’s Manual |