Intel HP8710w warranty Integrated Stereo Speakers

Integrated Stereo Speakers	Power Rating	2 Watts
	Impedance	4 Ohms
Communications
Integrated Intel Gigabit Network Connection	Ethernet Features	10 Mbit/s operation (10BASE-T; IEEE 802.3i; IEEE 802.3 clauses 13-14)
(10/100/1000 NIC)		100 Mbit/s operation (100BASE-TX; IEEE 802.3u; IEEE 802.3 clauses 21-30)
		1000 Mbit/s operation (1000BASE-T; IEEE 802.3z and 802.3ab; IEEE 802.3 clauses 34-42)
		Auto-Negotiation (Automatic Speed Selection)
		Full Duplex Operation at all Speeds, Half Duplex operation at 10 and 100 Mbit/s
		IEEE 802.1p QoS (Quality of Service) Support
		IEEE 802.3x Flow Control (IEEE 802.3 clauses 31-32; configurable)
	Power Management	ACPI compliant -- multiple power modes
		Situation-sensitive features reduce power consumption
	Performance Features	TCP/IP/UDP Checksum Offload (configurable)
	Manageability	Wake-on-LAN from standby and hibernation (Magic Packet and Microsoft Wake-Up Frame); Wake-on-LAN from off (Magic Packet only)
		PXE 2.1 Remote Boot
		Statistics Gathering (SNMP MIB II, Ethernet-like MIB, Ethernet MIB (802.3x, clause 30))
		Comprehensive diagnostic and configuration software suite
		Intel Advanced Management Technology (iAMT)
	Interface	PCI Express x1
	NIC Device Driver Name	Intel 82566MM Gigabit Network Connection
	Drivers Available	Microsoft Windows Vista
		Microsoft Windows XP
V.92 56K Data/Fax Modem	Form Factor	MDC 1.5 Daughtercard
	Power Management Support	APM Revision 1.2, ACPI
	Approvals/	UL, CSA, NEMKO, CCIB, Industry Canada, FCC Part 68, CTR21, FCC Part 15 Class B, Canadian ICES-003 Class B, C.I.S.P.R.22, Australian
	Certifications	ACA, CE Mark, Other Countries
	Data Mode Capabilities	V.92 data
		V.8bis
		V.80
		V44, V.42bis, MNP5 (Compression)
		V.42 (LAPM, MNP2-4) (Error Correction)
		Optional symbol rates:
		2800, 3429
		Asymmetric Symbol rates
		Synchronous primary channel data signaling rates:
		3600, 31200
		Automatic rate re-negotiation
		V.34
		V.32bis
		V.32
		V.23
		V.22bis
		V.22
		V.21
		Bell 212A
		Bell 103J
	Fax Mode Capabilities	TIA/EIA-578-B (Class 1)
		T.30, T.4 (Group 3)
		V.17
		V.29
		V.27ter
		V.21 Channel 2
	Command Set	V.250 (Partial)
		TIA-602
		Identification: +GMI, +GMM, +GMR
		Port control: +IPR, +ICF, +IFC, +ILRR
		Modulation: +MS, +MR, +MA
		Error control: +ES, +ER, +EB, +ESR, +ETBM
		Data compression: +DS, +DR
		V.251
Intel Wireless WiFi Link 4965AGN	Wireless LAN Standards	IEEE 802.11a
		IEEE 802.11b
		IEEE 802.11g
		IEEE 802.11n (draft 1.02)
	Interoperability	Wi-Fi certified (802.11abg only)
		Cisco Compatible Extensions Program compliant (802.11abg only) with Microsoft Windows 2000 and XP (details at
		http://www.hp.com/go/notebooks/WLAN)
		Tested with wireless access points from several major manufacturers
		(details at http://www.hp.com/go/notebooks/WLAN/draft-n)
	Frequency Band	2.4 GHz and 5 GHz
	Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
		802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
		802.11n (draft): 66 possible data rates, ranging from 6 Mbps to 300 Mbps, depending on the combination of Bandwidth, Modulation Coding
		Scheme, and Guard Interval used, as defined in IEEE 802.11n (draft) specification
	Modulation	Direct Sequence Spread Spectrum
		DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
	Security1	Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES (support for key sizes of 128, 192, and 256 bits), 802.1x authentication
		types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2, LEAP, EAP-FAST.
		Support for Cisco Security Features (proven compatibility with Cisco Aironet infrastructure products through the Cisco Compatible Extensions Program
		Version 4) with Microsoft Windows 2000 and XP only.
	Sub-channels	Multinational support with frequency bands and channels compliant to local regulations.
	Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
	Network Architecture	Ad-hoc (Peer to Peer)
	Models	Infrastructure (Access Point Required)
	Roaming	IEEE 802.11 compliant roaming between access points
	Output Power (for CKK)2	15 dBm
	Output Power (for OFDM; power varies by data	15 dBm
	rate)2
	Power Consumption	Transmit: 2.3 Watts (average, with two spatial streams)
		Receive: 1.9 Watts (average with three receive chains)
		Idle mode3: 30 mW (average)