BIOS SETUP
28 IB940 User’s Manual
“Standard CMOS Setup” choice allows you to record some basic
hardware configurations in your computer system and set the system
clock and error handling. If the motherboard is already installed in a
working system, you will not need to select this option. You will need to
run the Standard CMOS option, however, if you change your system
hardware configurations, the onboard battery fails, or the configuration
stored in the CMOS memory was lost or damaged.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Fri, Oct 20, 2006 Item Help
Time (hh:mm:ss) 16 : 11 : 00 Menu Level >
IDE Channel 0 Master None Change the day, month,
Year and century IDE Channel 0 Slave None
IDE Channel 1 Master None
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 4 Slave
None
None
None
None
None
Drive A 1.44M, 3.5 in
Drive B None
Video EGA/VGA
Halt On All , But Keyboard
Base Memory 640K
Extended Memory 2086912K
Total Memory 2087936K
At the bottom of the menu are the control keys for use on this menu. If
you need any help in each item field, you can press the <F1> key. It will
display the relevant information to help you. The memory display at the
lower right-hand side of the menu is read-only. It will adjust
automatically according to the memory changed. The following
describes each item of this menu.
Date
The date format is:
Day : Sun to Sat
Month : 1 to 12
Date : 1 to 31
Year : 1999 to 2099