BIOS SETUP
AC97 Audio
The default setting of the AC97 Audio is Auto.
CSA LAN (Giga-LAN)
The field enables or disables this Intel Giga BaseT Ethernet controller.
Init Display First
By default, the system initializes the PCI Slot VGA when the system boots.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the board and you wish to use it. If you install an
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and their addresses. The default values for these ports are:
Serial Port 1 | 3F8/IRQ4 |
Serial Port 2 | 2F8/IRQ3 |
Serial Port 3 | 3E8/IRQ11 |
Serial Port 4 | Disabled/IRQ10 |
Parallel Port | 378H/IRQ7 |
UART Mode Select
This field determines the UART 2 mode in your computer. The default value is Normal. Other options include IrDA and ASKIR.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP | Standard Printer Port |
EPP | Enhanced Parallel Port |
ECP | Extended Capabilities Port |
PWRON After PWR-Fail
This field sets the system power status whether on or off when power returns to the system from a power failure situation.
42 | MB865 User’s Manual |