Intel user manual MB879 Specifications, Introduction, MB879 User’s Manual

		INTRODUCTION
MB879 Specifications
CPU Socket	Socket 479 or FBGA on board
CPU Supported	Intel Pentium® M / Celeron® M, 90nm process, (3xx only, 4xx not
	supported)
CPU Voltage	0.700V ~ 1.708V
CPU Speed / FSB	Up to 2.26GHz / 533MHz FSB
Green /APM	APM1.2
Chipset	ATI Radeon Xpress 200 (RC410MD) / SB450 chipset
		NB: ATi Radeon Xpress 200 (RC410MD), 707-ball FCBGA
		SB: ATi SB450, 564-ball BGA
BIOS	Award BIOS, support ACPI function
Cache	512K/1M/2M Level 2 (CPU integrated)
Memory	1x DDR2 400/533/667 socket (single channel, w/o ECC),
		Max.1GB
VGA	ATi RC410MD built Mobility Radeon 9600 (M10) graphic core.
		Supports DirectX 9.0 and supports CRT, LVDS & TV-out
LVDS	ATi RC410MD built controller and transmitter, supports 24-bit
		single/dual channels LVDS
LAN	-	Realtek RTL8100C-LF (10/100) LAN controller x1
	-	Marvell 88E8052 PCI Express x1 Gigabit LAN controller
		(option)
USB	ATi SB450 built-in USB2.0 host controller, supports 6 ports
Audio	ATi SB450 built-in Audio controller + AC97 Codec ALC655 for
		5.1 CH (Line-out, Line-in & Microphone)
	NS LM4950 (8-ohm 2W stereo audio power amplifier)
Serial ATA	ATi SB450 built-in SATA host controller, supports 2 ports
1394 (option)	TI TSB43LV22 (dual port)
Local bus IDE	ATi SB450 built-in two channels Ultra DMA 100/133
	-	IDE1: 40 pins box-header; IDE2: Compact Flash (option)
LPC I/O	ITE IT8712: COM1, COM2 (RS232), IrDA, Floppy, hardware
	monitor (3 thermal inputs, 4 voltage monitor inputs, VID0-5 & 2
	Fan Header). Parallel port not use
2nd I/O	Fintek F81216D for COM3 / COM4
Edge Connector	PS/2 Connector x1 for keyboard/mouse
	Gigabit LAN RJ-45 + dual USB stack connector
	10/100 LAN RJ45 + dual USB stack connector
	DB9 & DB15 stack connector x1 for COM 1 and VGA
	RCA Jack x1 +S-Video for TV-Out
	SPDIF/OUT connector x1
	1394 Connector x1
	RCA Jack 3x1 for Audio (Line-Out, Line-In & Mic) – 1U height
Onboard Headers /	DF13-20 x2 for LVDS
Connectors	40 pins, 2.54mm, box-header x 1 for IDE1
	5x2 pins pin-header x1 for 2 USB ports
	8 pins pin-header x1 for 1394
	30 pins pin-header x1 for COM2/3/4
	Slim Floppy connector x 1
	5 pins pin-header x 1 for IrDA
Expansion Slot	PCI slot (32bits/33MHz) x1
	PCI-Express (x1) x1 (align w/ PCI slot); Mini PCI connector x1
Digital I/O	Supports 4 in, 4 out
Watchdog Timer	Yes (256 segments, 0, 1, 2…255. sec/min)
Power Connector	Standard ATX 12V
System Voltage	+5V, +12V, -12V, 5VSB, -5V & 3.3V
Other Features	Modem Wakeup, LAN Wakeup
Board Size	170 x 170mm

MB879 User’s Manual 3