INSTALLATIONS
JP1, JP2: Watchdog Timer & LAN1/LAN2 Bypass Settings
JP1, JP2 Setting Function
JP2 Pin 1-2 & 3-4
Open
JP1 Pin 1-2
Closed
System will bypass LANs upon the time out
of watchdog timer.
JP2 Pin 1-2 & 3-4
Open
JP1 Pin 2-3
Closed
System LANs bypass function controlled by
SIO GPIO15.
JP2 Pin 1-2 & 3-4
Closed
JP1 Pin 1-2
Closed (Default)
System will reboot upon the time out of
watchdog timer.
JP9: Configure and Recovery (Factory use only)
JP9 Setting Function
Pin 1-2
Short/Closed Normal (default)
Pin 2-3
Short/Closed Configure
Open
Recovery
JP16: Clear CMOS Contents
Use JP16 to clear the CMOS contents. Note that the ATX-power
connector should be disconnected from the board before clearing
CMOS.
JP1 Setting Function
Pin 1-2
Short/Closed Normal
Pin 2-3
Short/Closed Clear CMOS
10 MB935 User’s Manual