NSC2U Base Model 0 Configuration: All Production SKUs are base model 0 SKUs (no processor, heatsink, memory, hard drive,
power cord, operating system, or plug-in adapters are provided). Those components must
be ordered separately as Accessories from Intel or from third party vendors listed in the
Tested Hardware and Operating System List (THOL).
The table below lists which components are included in the base model 0 SKUs and which
ones must be ordered separately or as optional accessories.
Component Description AC Mod 0
Configuration
DC Mod 0
Configuration
AC power supply (600 W) 1 included -
DC power supply (600 W) - 1 included
Filler Panel in 2nd power supply bay 1 included
Chassis (bezel, sheet metal, top cover, PCI carrier) 1 included
Server Board T5000PAL 1 included
Bezel (gray) 1 included
PCI Riser FH-FL (two PCI-Express and one PCI-X slots) 1 included
PCI Riser LP (two PCI-Express slots) 1 included
FB-DIMM slots (memory not included) 8 included
Trays for hot-swap 2.5” SAS Hard Disk Drives 6 included
Filler Panel in optical device bay 1 included
Rear Panel GbE NIC (Cu) ports (via Server Board) 2 included
Server Deployment Toolkit (CD) 1 included
Quick Start Guide 1 included
Power Cable Purchase separately1
SW RAID 0/1/10 Included
HW RAID 5 Optional Accessories2
Intel® Z-U130 Value Solid State Drive Optional Accessory2
Mounting kit for Intel® Z-U130 Value Solid State Drive Optional Accessory2
Remote Management Module 2 Optional Accessory2
PCI-X FH-FL Riser (3 PCI-X slots) Optional Accessories2
Ethernet I/O Module (dual Gigabit rear ports) Optional Accessory2
SAS I/O Expansion Module (x4 external rear port) Optional Accessory2
Rack Mount Kits Optional Accessory4
Processor (refer to “Details on Ordering Processors”) Purchase separately5
Heatsink Accessory or purchase separately
Memory Purchase separately5
Hard Disk Drive Purchase separately5
Optical Drive Purchase separately5
Accessories for NIC-in-Front Capability3
Quad Port Bypass Adapter (Copper) Optional Accessory3
Quad Port Bypass Adapter (Fiber) Optional Accessory3
Quad NIC-in-Front Mounting Kit (Copper) Optional Accessory3
Quad NIC-in-Front Mounting Kit (Fiber) Optional Accessory3
1Refer to AC power cord accessory in this section
2Refer to “Production Spares/Accessories List” in section III
3Refer to “Quad Port Bypass NIC Capability” in section IV
4Refer to “Rack Mounting Options” in the Appendix
5Should be purchased separately (parts not listed in this document)
3/28/2008 v 2.2 6 of 20